Oracle fog light for Mod Bumper install

[Dtom417]

I'd like to install to Aux 2 or one of the 10amp aux switches if possible so that I can keep the 30 amp for something else . What exactly do I need to do ? I've watched some videos but they all use Aux1 and I want to make sure I do it right the first time . Thanks

Sponsored

 

[jhruzek]

Just use the right color of wire. You can search for the wire colors associated with each of the switches.

 

[Built Wild]

I'd like to install to Aux 2 or one of the 10amp aux switches if possible so that I can keep the 30 amp for something else . What exactly do I need to do ? I've watched some videos but they all use Aux1 and I want to make sure I do it right the first time . Thanks

I just installed the Oracle Fog Lights on my mod bumper last night. I wired them to AUX 6. After you finish the wiring at the front of your engine and grounding the black wires to the frame, locate the lavender wire in the back right corner. Instead of connecting the Lavender wire to the Yellow wire (AUX 1), choose one of the wires below:
AUX 2: Green/Brown
AUX 3: Violet/Green
AUX 4: Brown
AUX 5: Blue/Orange
AUX 6: Yellow/Orange

Sponsored