Front License Plate Mounting Location

[BuzzyBud]

I have one of these ordered, assuming it would work. I however didn't stop to think about the sensors! It looks like it will still work as there are multiple mounting points on the plate to get it out of the way. Also, I can't quite figure out which package gets the front sensors. I have a BD on order with the mid, and assume it has the front sensors with the co-pilot 360, but I've seen examples of BD with mid without them, soooo Any one know when the front sensors are added to the modular front bumper?

To the best of my knowledge the front sensors are found on the steel bumper if you select either the High or the Lux packages. When you read the description of the High package, you will see Front Sensor System included.

Sponsored

 

[Thed]

To the best of my knowledge the front sensors are found on the steel bumper if you select either the High or the Lux packages. When you read the description of the High package, you will see Front Sensor System included.

 

[Biz]

New guy here from Ontario CA. Same issue front plate required. Best I've seen so far is the shackle mount. I've used sto n sho in the past and have reached out to them to see if they are developing one for the Bronco. I'll post their reply.
https://stonsho.com/

 

[Biz]

Sto n Sho have confirmed they are making one for the new Bronco. I will post it up when it's ready.

 

[CAD123]

Just me or does the front plate detract from the look?

 

[Lagrange 6g]

Are there any photos or ideas of where the front plate will mount to?

And for the people posting, i don't need a front plate, etc. good for you and thanks for the thread bump.

Saw this one on a ob at a dealership in austin yesterday
I think it’s attached to the plastic part of bumper

 

[HBTFD]

Here’s an option

https://www.bronco6g.com/forum/thre...cense-plate-solution.22111/page-3#post-788429

 

[MattyAg]

Here’s an option

https://www.bronco6g.com/forum/threads/front-license-plate-mounting-location.8005/

Did you just link a post to the same post? that is cruel. I clicked through a few dozen times before I realized I was looking at the same thing over and over again.

 

[HBTFD]

Did you just link a post to the same post? that is cruel. I clicked through a few dozen times before I realized I was looking at the same thing over and over again.

https://www.bronco6g.com/forum/thre...cense-plate-solution.22111/page-3#post-788429

I copied the wrong link. I edited the post. Sorry to put you in a cyber loop.

 

[deanfromkelowna]

Are there any photos or ideas of where the front plate will mount to?

And for the people posting, i don't need a front plate, etc. good for you and thanks for the thread bump.

 

[BostonGuy]

It looks like all the "shackle" or tow hook mounted plates will only work on the type of hook on the modular front bumper. Has anyone seen one that will work on the standard bumper hook that hangs (d shackle I think it's called)?

 

[Tor148]

This is what I did.
Its a first edition so has everything, and this is not blocking anything.
Just drilled two holes in the plate to match bolt patteren

Have done plenty of off roading and highway driving and no issues

Sponsored