- Thread starter
- #1
Just posting this in hopes it may help someone else.
We were having an intermittent issue where our Bronco would throw a bunch of error codes on the dash when coming to a stop when the auto start stop would kick in. Engine would shut off and screens would go blank after the error messages were shown on the dash. We would start the engine back up and all was fine. Happened about 4 times over the period of two months. Read a couple of posts here about checking to make sure fuses and fuse box were secure. In the process of tightening down the fuse box and fuses I noticed a tiny wiggle in the positive battery cable connection. It wasn't so loose that I could remove it by hand but definitely needed a bit of tightening. (BTW a shocking number of fuses probably 50% needed to be pushed firmly into their socket). All has been good for about 3 weeks since the "fix".
We were having an intermittent issue where our Bronco would throw a bunch of error codes on the dash when coming to a stop when the auto start stop would kick in. Engine would shut off and screens would go blank after the error messages were shown on the dash. We would start the engine back up and all was fine. Happened about 4 times over the period of two months. Read a couple of posts here about checking to make sure fuses and fuse box were secure. In the process of tightening down the fuse box and fuses I noticed a tiny wiggle in the positive battery cable connection. It wasn't so loose that I could remove it by hand but definitely needed a bit of tightening. (BTW a shocking number of fuses probably 50% needed to be pushed firmly into their socket). All has been good for about 3 weeks since the "fix".
Sponsored
