ARB SUMMIT winch bumper weight

[Searchdawg]

I just put the Zeon 10-S and ARB Summit on my bronco a few weeks ago, by using all the bumper spacers in the kit I didn't need to cut at all.

Thanks! That’s the answer I was hoping to hear!

Sponsored

 

[bcool2525]

Thanks! That’s the answer I was hoping to hear!

The only downside to my method is that the bumper does stick out about 1/4" further than it would normally, so if you really don't like how that looks then trimming would be required.

 

[Texasliam]

Thanks! That’s the answer I was hoping to hear!

If this is the fascia it has not been cut. It is right against the controls box.

 

[Texasliam]

Thanks! That’s the answer I was hoping to hear!

hey something I wish I had done, paint the tow hooks to match your trim color. In my case badlands orange.
And if you’re planning on fog lights prep it in. Hard to install later. Squadron SAE fit really well.

 

[Searchdawg]

The only downside to my method is that the bumper does stick out about 1/4" further than it would normally, so if you really don't like how that looks then trimming would be required.

I am okay with it sticking out 1/4” or so. Better than cutting the body up. Thanks for your quick reply.

 

[Searchdawg]

If this is the fascia it has not been cut. It is right against the controls box.

Awesome and thank you for the photos. I haven’t decided about upgrading factory fogs yet, but leaning towards the Diode Dynamics

If this is the fascia it has not been cut. It is right against the controls box.

Thank you for the photos! Undecided if I am going to upgrade the factory fogs, but if I do, they will have to be SAE legal. There are several to choose from.

 

[bcool2525]

I am okay with it sticking out 1/4” or so. Better than cutting the body up. Thanks for your quick reply.

On the plus side with all the shims in place I have a 1/8in gap between my facia and the control box.

Sponsored