- Thread starter
- #1
Anyone have a solution for relocating ACC radar when using a factory ford bronco winch with modular bumper.
I have ordered Mountains 2 Metal camera relo kit.
I have ordered Mountains 2 Metal camera relo kit.
Sponsored
Sponsored
ACC relocation fix for Ford Winch, Modular Bumper, Lux pkg
- Thread starter RickBadSas25
- Start date
- Watchers 3
- First Name
- Juan
- Joined
- Sep 18, 2024
- Threads
- 4
- Messages
- 24
- Reaction score
- 22
- Location
- NW Fort Worth Texas
- Vehicle(s)
- A Bunch
- Your Bronco Model
- Outer Banks
Several companies offer a relocation bracket. DV8 and Turn both come to mind. I find it interesting that you would need to do this with a Ford bumper...
I never relocated mine and the adaptive cruise control still functions. My relocation bracket is still brand new in box. Your results may vary but it worked for me.
Just wish I would have relocated the parking sensors prior to winch install.
- Thread starter
- #4
Worth a try,I’ll try it without relocating it. Thanks for the tip for relocating the parking sensors before winch install.
Sponsored
- Thread starter
- #6
- Thread starter
- #7
I completed my install. The M2M camera relocation bracket worked great, FYI on the 2025 Badlands there is no longer a camera wash, just the electronics. The ACC system works great without having to do any relocation. I just tucked the wiring up high under the Ford performance winch plate and it did not interfere with the operation.
I also opted to go with chon’s parking sensors and they worked great.
After reading a lot of the concerns about the front frame horns being bent with some of the other aftermarket winch mounts, I was thoroughly pleased and impressed with how beefy the Ford performance bracketry and add-ons support the front frame horns and I’m glad that I went in that direction. There is a great YouTube video out there on the install by Ford mechanic that was very helpful. Thanks to all the contributed comments. This is a great forum for it.
I also opted to go with chon’s parking sensors and they worked great.
After reading a lot of the concerns about the front frame horns being bent with some of the other aftermarket winch mounts, I was thoroughly pleased and impressed with how beefy the Ford performance bracketry and add-ons support the front frame horns and I’m glad that I went in that direction. There is a great YouTube video out there on the install by Ford mechanic that was very helpful. Thanks to all the contributed comments. This is a great forum for it.
Sponsored
Similar threads
