Search results

Bummer. I was hoping you’d agree with that 1” gap. 1st picture shows cv inserted all the way until c/clip locks. The black line in the tube is the starting point of the roller bearing. It has a 1” gap. 2nd picture shows the smooth surface of the CV shaft, the line in the center is a hump, the...

Thank you that is a sigh of relief. Yes, these darn Ai engines are hit or miss. That part number on the CV axle is what I keep referring to, but the box had this part number as in the attached picture. Two thoughts: 1, the 1” gap between the inboard side of the CV axle and diff tube is...

Very helpful information. Thank you!!! I’ve been receiving conflicting information on the CV axle MB3W-3A427-AC. Several search platforms said it was the right one. I just got this information from Google Ai, Saying that I’m using the wrong CV axle, it’s actually the drivers side. Isn’t the...

This is my first Bronco, so I’m on a fast track learning curve. Most of my builds are older Muscle cars. So am I right by saying there are only 2 intermediate shafts . One for M190 and the other for M210. Obviously the M210 fits my build. Putting this all together is a pain the ass, so I want...

Thank you for getting right back to me! You say there’s only I shaft for the M210. Then why did I have a 13 1/2” one in my Bronco and Snacktime says the same in he’s picture fitting the M210. Part# MB3Z-4B410-A, is the 14 3/8s shaft, which is the one I used and is 7/8s longer than the other...

Is the Inch on the picture above, showing the gap acceptable? I feel the shaft didn’t go in deep enough to seat in the roller bearing of the half tube. The 7/8s” differential between the 2 intermediate shafts may bring the CV axle more into the tube, thus allowing more angle movement at the...

What are you saying ? Take the 14 3/8s out and put in the 13 1/2?

I believe the CV axle is in too much of a bind. I fought like hell to get the shaft in the rotor and the lower control arm on the knuckle. As you can see in the picture, the inward side of the CV axle is sticking out at least an inch from the Tube. From my research, I found that I had the...

1FMEE5DPXPLB05502

I picked up a Salvaged 2023 Wikdtrak/Sasquatch/LUX model. Has 21000 miles, hit to the right front wheel. Knuckle broke, CV axle was missing, the differential tube broke. Got it home and ordered all the parts, had to source different venders. There was an intermediate shaft in the vehicle...