Search results

The part numbers of the audio components used in the units. Entry level DACs vs top end. Same goes with the CPU Zen DACs are provide higher SNR and lower distortion. All of these figures are provided in the datasheets from TI

Mostly! So you can get to the ACM(headunit) by removing the climate control panel, two 10mm bolts either side pull hard and it comes out. Plug the T harness in and run that to the back of the car where the factory amp is. Remove factory amp and plug F25 in. The f25 supplys the signal to your amp...

Let me give you the full run down. There are two different a2b (digital audio bus) amps in the 25+ model Broncos. The base, which is what you have and the B&O amp. They both use A2B however the B&O amp also has CAN as it is a smart amp. For the ZEN-F25 to function properly it needs CAN. As...

The kit is only applicable to our amp. Not much use with other amps

Oh then just get the pre-amp: https://navtv.com/products/NTV-KIT1035/zen-f25-20-25-ford-a2b-audio-interface.html?srsltid=AfmBOor2ewMDiJzHhUF4CGKOD1IZVsnXMc_qlJTvm9vLCXJE2HCkmDmW It's already compatible with NON-B&O Broncos and will allow you to remove the factory sub woofer amp all together and...

Yes sir! Same story as the outgoing mObridge kit. https://navtv.com/products/NTV-KIT1051/zen-power-9-f25.html https://navtv.com/products/NTV-KIT1055/bronco-kit-21-24.html Here is the new amp and the b&O Bronco kit. You'll need the new non b&O kit which isn't up on the website yet but it will...

We are about a month out from the non B&O kit. It will only be compatible for 2025+ Broncos. Harness and bracket are different to B&O Broncos

In your application the only advantage would be the difference in audio quality, there is a measurable difference on both optical and RCA. There is a reason SQ competitors all use Zen! Zen pre-amps are built with audiophile grade components. So it really depends on your build and budget, if you...

Hi All, As i am sure anyone who has a non B&O Bronco knows, the audio sucks and its a pain to get to sound as it should. The reason for this is that the factory head unit drives all speakers except for your subwoofer. To upgrade your audio you had to get your signal from the headunit post...