Search results

Sorry, edit from last post. 'S&B' cold air intake for 2024 Bronco Raptor. No Woosh by the way. Seems like better throttle response due to less turbo lag. Sounds about the same. Install was super easy.

SMB cold air intake kit definitely replaces the tube from the intake box to the turbo. Just looking at it, it seems like a huge improvement. Tapered smooth bored hard pipe (installed) compared to this weird ribbed rubbery thing that is factory.

Sorry, you can't see the pretty lady. 40 inch Super Swampers on bronze method 17s. 2 in collar lift.

I agree, stick with the 17" wheels. And add some 40-in super swampers.

My wife was the one who asked me to do it. She didn't want two kids chasing us around on dirt bikes. Yes, kids love it.

Yes, I removed the brace. I found that the center section is not connected to the upper horizontal brace and does not create a sheer reaction. Doesn't do anything that the welded in brace isn't already doing. Center section 5/16 or M equivalent bolts are in much larger diameter tubes.

Are you able to furnish your calculations?

Made some 1/4" plates and bolted into the existing threaded rivets in the rollbar. Attached the shoulder belt system bought online with supplied Hardware.

I should have added 'Not for Highway use' explicitly. Head and leg room for 5 ft tall and under. Kid tested. No problems.

I thought I'd share this install for a fold and Tumble rear seat. Connected to Cargo tie downs. Apparently rated at 450 lb each. Plate to connect shoulder belts also.