Search results

I saw a video on Youtube recently (Vertasium) about what happens when tin comes in contact with a tin polymorph and it disintegrates. Probably not at all related to what is happening here but it reminded me of it.

Google Gemini AI and the others are known for a low accuracy rate. It doesn't personally know the answer - it has to rely on what it finds with a web search and then further extrapolates from that, so it is prone to misinterpretation. All it takes is one post on social media from someone being...

I had that problem too during install and yes, I used the wrong holes. I took a photo to line up with yours (this is the correct position) but it looks the same to me.

This is my DIY version of an altimeter: It's an M5Dial with a GPS module attached (SKU U032-V11). The code was written by Claude Code and uploaded to the device with Arduino IDE. I use the device for other purposes mostly. The mount is a simple laser cut piece of acrylic and tripod mount.

Going back to stock! I love how this exhaust sounds around town, but on long interstate trips it's just a bit too much drone for me. Ready for something a little more muted for highway cruising.

2021-2025 Ford Bronco Axle-Back Exhaust System S-Type Part # 11977CB There are scrapes on tips from rubbing (see photos). Performs perfectly. Installed for approximately 4000 miles. Paid $1200 in August 2025. Asking $500. Pickup from Raleigh NC area

This is pretty cool. Minor correction though - in your instructions you stated "Open the AS-BUILT module". It should be "APIM module" (and not the as-built version). Also in my Forscan v2.3.68 the setting was just labeled "Themes", without the QT HMI in front, but I don't know how common that is.

This is the setup I went with as well. I mounted the Cobra 75 Allroad radio box using the Mountains2Metal under dash mount. For mic holder, I'm using the Proclip angled dash mount and universal radio holder. I went with the 2' Firestik FG2648B NGP antenna and Mountains2Metal antenna mount on the...

Thank you for asking about this. Have the same noise. Glad to know it is common/normal.

Did you notice if the 12V lighter power adapter ran hot? I tried using the power adapter that Revolink sells (here) and it got very toasty connected to that rear cargo 12V port. Maybe you can suggest one that works well and doesn't cook itself when plugged into the 12V power port?

Thanks for validating the audible alert functionality! I do have audible alert enabled in the settings and the sound/volume/ringer all enabled and turned up high on the iPhone without carplay or bluetooth audio enabled. I also tried an older iPhone (iOS 14) and it behaved the same as well. Using...

Has anyone who installed the ARB pressure control app have an issue where the audible alert doesn't sound and the Current Pressure reading doesn't change color to indicate it has reached the target pressure? It doesn't appear to be working for me when either inflating or deflating. Otherwise the...

2024 Badlands 4-door with marine grade vinyl. One day I heard a slight rattle as the vehicle coasted over bumps. I parked in the driveway and shifted my weight back and forth to rock the Bronco to try to reproduce it. I heard the rattling sound but I realized it was coming from the seat, when...

I installed the Borla S-Type axle-back on 2.7L. The one thing I wish I had known beforehand is that you only get the deep throaty sound during cold starts, and the rest of the time it's just "eh". Cold starts sound like this video in post #1. Amazing right!? The rest of the time it sounds...

Yes. It's that same screw.

Well @Ducati1098, I'm happy to report there is another way. This method surprisingly worked well and only took about an hour. I'm posting it here in case some future victim runs into the same problem. 1. Take a long flat screw driver to pry with and a hex key inserted into the screw hole. Use...

So I went to swap out the door handles (five doors). Ran into a snag on one of them. When I tried pushing the new door handle onto the door, the internal mechanism shifted inboard and the loose 5mm release screw came out altogether. It fell to the inside of the door but I was able to fish it...

Which PlayStation are you planning to use, and what will you do for a screen?

My friend, wanting to use a modern PlayStation while camping and planning to only spend around $80 on a Walmart inverter are two incompatible lifestyle choices. You are setting yourself up for breaking something that is going to cost a lot more than $80 if it even works at all. Like others have...

Background: There are trim rings available that match the exterior paint color. Nothing against them, they are just a little too bold for my taste. I was curious to find something that added a bit of color but wasn't so distracting. Why not fill in that groove on the ring with an accent color...