Search results

I now have almost 5K miles on my ‘24, still does it just like it has since the day I got it. Had dealer drive it and they contacted ford who said compare to like model but no dealer within my area has a MT to compare it to. I came from driving mopar for a really long time, rams and jeeps...

Were either of you ever able to figure out an answer to to this for the rear doors? Thanks!

To re align the striker you have to get the screw holes behind the plate to move correct not just shift the plate? I’m assuming loosen then tap with a mallet or hammer?

So you’re not trying to get the outside plate to move cause I can get that to wiggle easy, you’re trying to get the screw holes into the correct spot in the body holes correct?

My rear driver side upper door hinge is rubbing when the door opens all the way. The hinge that stays on the door has rubbed the hinge that stays attached to the body. It seems like on the other rear door the lower hinge limits the door opening before the upper hinge makes contact. Does anyone...

Nice okay I did that on one side but not the other, have you noticed that the clips on the underside sit in different positions as it flexes? I’m 2 minutes from my local dealer, stopped by there while I was out, they are going to replace this one. If it happens again (which I’m sure it will)...

I know I have definitely seen worse on the forum, if its gonna happen to another one which seems like it would, then may not even be worth a trip to the dealer

Okay thank you! I’m gonna get some pics of mine today.

Mine seems to be doing the same, got some real sun out at the lake not shaded area and I noticed a little gap between cowl and windshield. The 11 clips that are visible when the hood is raised seem so sit further down along the outside edges than they are in the middle, almost like a bowed look...

Alright sweet thanks, from what I’ve seen the OEM skid plate bolts in where that deflector is and if equipped the deflector isn’t there so I’m assuming it’s just to deflect stuff away from the tank when it doesn’t have a skid.

For the RCI do you remove this deflector that’s in front of the gas tank?

If swapping tops between two broncos does the soft top bronco have longer bolts since they have the c pillar trim pre installed, or are they the same length with or without?

What’s the part number for the kit? I searched the one on the box and it just keeps coming up as the bracket

Still available?

Mine is well greased with the globs of grease. Mines quite when being pressed in. Mine has an audible click that only happens at the very top of the release when I come off after I’ve pressed it in more than once. Like a quick out of first, don’t completely take foot off just resting then...

Yeah the dealer inspected, couldn’t tell if it was normal operation because they don’t have another manual transmission to compare it to. I’ve heard of others having the creaking noise

Mines a single click, I would call that it sounds like a creaking noise. I don’t have that really.

That’s what I had assumed when I looked at it, is there anyway to adjust the rear quarter panel (the top piece) inward at all? I’m assuming moving it forward isn’t an option and would take that gap toward the door anyway

Just got done adjusting the gaps on the rear bumper to somewhat even, now onto the next. Mine looks exactly like this, did you ever find a fix?

Stumbled on this cause I have this issue on a ‘24 so still is a QC issue. Any resolution OP?