Sponsored

Search results

  1. Mabett Drill-free Front License Plate Bracket Available Now!

    Up date to my installation; I took the factory bolt and using a Dremel with a cut wheel, I cut off the thick captured washer from the bolt. Using a thin washer, aprox 1/4th the thickness of the washer I had just cut off, I was easily able to install the bolt and secure the passenger bracket...
  2. Mabett Drill-free Front License Plate Bracket Available Now!

    I used one of these to get the bolts out and then again for reinstall. GT//Rotors 10mm Ratchet Wrench Flex Head Keychain Key Ring - Amazon.com
  3. BEWARE ICE!!

    Having to ice-skate into the house didn't trigger a warning?
  4. Auto Start/Stop Still On

    Initially the PROCAL tune disabled the auto-start-stop feature. This tune was not certified in California. To get CA certification, disabling auto-start-stop feature was removed. All subsequent versions AND updates remove the delete...
  5. 2022 Bronco Badlands 2.3 reduced power

    I had a 2019 Ranger that did this occasionally. It was caused by the vehicle not down shifting on a slight grade, usually on an interstate, with me being really light on the throttle. I would pull over as soon as practicable and shutdown and restart. I learned to put a little more "foot" into...
  6. Procal4 can disable Auto Start/Stop?

    Auto Stop Eliminator. Easy 20-minute install. Autostop Eliminator - Disable The Auto Start Stop Feature
  7. IAG I-Line mud flaps - deceptive advertising

    I have the IAG Flaps on my OBX and appreciate the extra protection afforded. Sure, they extend out past the stock OBX flairs, but the look is not atrocious. If they fit the stock OBX flairs like they do the SAS flairs they wouldn't provide as much protection, which is the whole reason for...
  8. Aeroskin II hood deflector fail

    I bought mine with points from my dealer and installed it myself. I noticed that it had a tendency to want to separate at the outer edges after a day or two, so I used a couple of spring clamps to "press" it back in place. I also used an edge roller, like one used to roll wallpaper edges...
  9. Display is very dim ?

    Been there... :wink:
  10. Mabett Drill-free Front License Plate Bracket Available Now!

    Up date to my installation; I took the factory bolt and using a Dremel with a cut wheel, I cut off the thick captured washer from the bolt. Using a thin washer, aprox 1/4th the thickness of the washer I had just cut off, I was easily able to install the bolt and secure the passenger bracket...
  11. Audio Files and Thumb Drives for SYNC 4

    128GB and 256GB Both hold a "Sh*t Ton" of music and the 128 has the same amount of music as the 256 with room for more. With the 128 and set to straight play, song 1 to song 500 something it would take somewhere like 24 hours or so to play them all.
  12. Audio Files and Thumb Drives for SYNC 4

    I've been doing this for years with both my vehicles. Sync 3 in my older vehicles worked fine as does sync 3 in my wife's Bronco Sport. Sync 4 does it a smidge better...
  13. Mabett Drill-free Front License Plate Bracket Available Now!

    It came yesterday and it is exactly as described. Installation was a PITA!!! I am a highly trained aircraft mechanic and I have installed equipment in unbelievably tight spaces and normally this install would be a "cake walk." Factory bolts for the plastic stock bumper have a tapered end to...
  14. Mabett Drill-free Front License Plate Bracket Available Now!

    I just ordered on today, Saturday Delivery.
  15. Mods to Increase Fuel Economy ?

    A lot of responders have said this, reducing weight is the biggest gas saver. That being said, keeping you fuel tank full kills gas millage. Many, many drivers try to keep their tanks full. Big mistake! I'm not saying "never fill your tank;" I'm saying let it run down to at least 1/4 full...
  16. CoastieN70

    Military Bronco's

    USCG Retired Aviation Machinist Mate AD3 to ADC CWO (AVI) Wo1 to CWO4 Did a side gig as a Recruiter in St Louis 1981`- 1983 and then Chicago 1986 to 1987 1967 - 1970 / 1972 -2000
  17. Ford Performance Calibration now available for 2024 Bronco!!

    I said valves when I really meant pistons. Whoops!
  18. Ford Performance Calibration now available for 2024 Bronco!!

    Really!?! I ran Livernois tunes in my 2015 Explorer Sport, 2017 Explorer Sport 2019 Ranger and 2020 Explorer ST. They specifically warned against using 87/89 octane except in an emergency, like if you ran out of gas and Triple A delivered 87 octane. In such situations they advised to keep...
  19. Ford Performance Calibration now available for 2024 Bronco!!

    The tune is specific to 91/93 octane. Running lesser octane WILL cause valve damage. I have run tunes in 3 different Fords and was told this by the companies that provided the tunes... I was also told that in a "pinch" 87 octane could be used, as in you run out of gas and triple A delivers...


Top