Search results

I was apprehensive about using a spring compressor. I took it to a local off-road place - can’t remember what they charged but it wasn’t too bad. Took one day, including the alignment.

This is what I used. Specifically says it’s for HOSS 3.0. Still very happy with it. https://eibach.com/product/E30-35-056-01-22?epsid=3459

I added a fab fours matrix bumper and warn evo winch to my hoss 3.0 Wildtrak and lost an inch on the front, and it was really soft on the front end. My solution was to get the Eibach pro-lift springs and I’m very happy with how it drives now. I got 2 inches in the front (so 1 inch higher than...

I was wondering about this too. I measured and ended up buying 3/8 pins with 2 inch working length. Turns out those were probably too long by 1/2 inch and you could go 1.5 inches.

I did this today. Works great! I ended up using two washers on the top and only one on the back. I couldn’t get the top to latch with only one set of washers, but the back was too loose with two so I took one off. I wonder if the top will need to have a washer removed once the foam settles.

I did exactly the same thing - I was using the old video. Thanks for pointing that out, will switch things around and go that route.

Just got mine intalled tonight. A couple thoughts while they are fresh on my mind: 1. Install wasn’t too bad. After reading reports I was planning for a long project. I did this over two nights and probably spent 4-4.5 hours total. I took my time and watched the video as I went along. 2. I...

Did you use spray or liquid FlexSeal, or the glue? I’ve got a SlipStream on order and am thinking about doing your suggestions out of the gate. Thanks for the feedback

Thanks for sharing your experience - do you have much extra added weight in the back? I was worried the Eibach might be too stiff in the back as I don’t have much back there. My thinking was, I’ve created more pre-load on my springs (and thus my position-sensitive shocks) with the heavy...

@Mitch Panda Motorworks Have you seen anybody use just the front springs? I had about an inch of rake and then added a heavy bumper/winch combo and lost another 7/8 inch height in the front so now sitting at about 2 inches rake and the front ride is soft. I’m wondering if I add just the front...

I have a Wildtrak and had an inch of rake on it stock. I just added a pretty heavy winch/bumper, and lost almost an inch up front so now I’m sitting at just shy of 2 inches rake. I definitely think the front is riding softer as well. Could someone give an opinion on what would happen if I added...

I am using the full height on the front (bought two sets, have the passenger lifted/jacked too). My seats are powered so can’t comment on cranks, but I still have them elevated. I set closer to upright.

I would like do to that, but I couldn’t figure out if their leveling kit would work with hoss 3.0. I probably just need to call them but if anyone has any insight as to whether this kit would work, I’d appreciate any insight.

I thought about that one, will definitely keep it on the list thanks

Bit of a weird question I know, but here’s the deal: I entered the Fab Fours Christmas contest and managed to win a $250 gift certificate to FabTech. I’m very happy to have won it but it was not the prize I was shooting for (planning a bumper/winch upgrade in the near future). I’ve got a...

Warn Evo SR 10 from Northridge 4x4, Groove fairlead from Yankum Ropes

not sure if you’ve found the answer yet, but Northridge 4x4 currently has a great deal on the Warn Evo 10, it comes to $269 after rebate. This is the one that Fab Fours says fits on their website. It’s the steel cable model and comes with wired only control, but my plan was to buy synthetic rope...

Thanks for the info and the picture - that helps. Let us know how the camera mount works out, I was worried the bar is so low profile it would be tough to get a camera relocate wedged in there but hopefully since DV8 and ADD are the same company they’ve thought ahead and it’s compatibLe. As for...

Haha yeah , that’s right. I bet if someone was really motivated they could shave a Baja S2 case a bit and jam it in, but I’m not gonna be that guy.

thank you, that’s helpful. For those interested, a Baja Designs S2 is 1.76” high, and Diode Dynamics SS2 is 2” high