Search results

I have the Broaddict TrailDeck and it works with my Goose Gear tailgate table. I did put the handle on the lower drawer as it was very close to the table. Since I moved the handle, I decided to cut the lip on the top deck so it wouldn't interfere with items on put in the drawer. The main...

I ran wire directly to the battery to power the 12V conversion kit.

I originally had mine set up in the cab but ended up moving it to my Roam 66L case on the roof rack. I was able to run the Starlink off of my Jackery Explorer 300 and everything was contained in the Roam box, which was nice. However, I was only getting about 6 hours with the Jackery. So I...

Well, I got the new caliper brackets last week and installed them this past weekend. The installation went smooth and everything fit. I will post some picture, I thought I took pictures of the rear brackets installed, however, I couldn't find them. The bolts on my old brackets were still...

Sorry I missed this one. CARB compliant means CA doesn't feel this meets their California Air Resources Board (CARB) Standards and therefore does not allow it to be sold or installed on a vehicle ment for highway use. I bought mine from Summit Racing and picked it up in Sparks, NV since I...

I have the Fab Fours Premium Winch Bumper with a winch attached and I really didn't want to take it off. I figured I would try to install with out removing my bumper. I can't speak to any other bumper, but I was able to install it without pulling off my bumper. This intercooler really...

I did inspect my portals and no leaks so far. There were no leaks on the first oil change and I keep checking due to the issues some are having and still no oil leaks. I never used the o-rings that came with the kit because it made no sense as they would squish out when you torqued down the...

I don't think it looks that bad. However, I do prefer the 2025 Navigator's dash over the Expedition.

I guess it is time for a full inspection again...fingers crossed it's all good. I did tape the threads on both the fill and drain plug when I installed them and when I did the first oil change. I didn't trust the o-rings for the reasons you menttioned. I will say when I changed the oil the...

I ordered one, I think it will work out for my needs. Also, apparently it's not CA CARB compliant so that may be an issues for some people. You mentioned upgrading the clamps. I think I am going to do that, what size diameter are the hoses?

Thank you for posting this install. I have been looking at this intercooler. However, like you said there are no installation instructions. Looking at the pictures it appears like this one will meet my needs. I had moved my ACC to the lower center of my gill when I installed a new bumper, this...

Yes, please do. I have been trying to get more info on the Wagner Tuning high-mount intercooler. I even emailed the manufacture to see if they could email me installation instructions but they said they didn't have them available yet.

Sounds like you had a nice time and learned a lot. That "oh chit" moment :shock: ...nice save. Thanks for sharing.

Agreed. Again, thanks for sharing I appreciate it. I definitely didn't want to find out the hard way.

I didn't get a chance to reach out to Quinn. However, 74Weld did send out an email regarding the issue, so they are aware. Here is their statement Dear Customer, I wanted to reach out to you as an issue was brought to our attention this week. We had a customer who had caliper bolts come...

It turns out my caliper bolts on all four portals were not torqued at all. None were backing out but I was able put the hex socket on and back them out by hand. Needless to say I am glad I checked, thanks again for posting the issue with the caliper brackets. All the other portal bolts were...

I need to change the gear oil anyway, so I might as well check everything while I am at it just to play it safe. Where did you get the torque settings? I didn't see them in the installation manual. I did check the jeep portal installation manual and they do list the torque specs for those...

Thanks for this info, I will have to check mine to make sure all is well.

Looking good, I too am curious how the Ride shock perform. Did you get the ones for the added weight? I had to get the heavy rear springs for my Fox shocks, I probably would have opted for these if they were out at the time. Also, as a follow up, I was able to fit my stock SAS wheels on the...

Well, you learn something new every day...I have never heard of balance beads before. I am going to have to do some research on those. Thanks.