Search results

I had a crack in my driver's seat. Replaced under warranty at 35,789 miles.

Yep, I see you've changed it in the "as built" code lines. There is also a config section in the BCM. This is where you must also "enable" the lights and the switch on 2 different lines. I had to re-write the as-built code and click enable for mine to work. Have you done both?

Look at the pic from an old post. There are a few places where you need to "enable" the settings as well. I had the same issue at first.

Sorta....that's a 3 on the tree with a long transfer case lever.

Yeah, it's a forscan setting.

It secures the wiring harness and washer fluid tube when the top is removed.

303 Can anyone clarify this info in Forscan? What does CKT mean in "FrontFog Ckt With Turn?" Or what to change to get the fogs to stay on when the turn signals are activated? I'm not sure what module value that is, I'm thinking either the CKT one or "Front Fog Auto Cancel."

Here's what I have on a 2022 Badlands 2.3 7MT 760-04-03 0100 0203 A91D

Can anyone clarify what the CKT means in "FrontFog Ckt With Turn?" Or what to change to get the fogs to stay on when the turn signals are activated? I'm not sure what module value that is, I'm thinking either the CKT one or "Front Fog Auto Cancel."

I'm in for a set...don't really need/want the color change. A switch on each light to operate independently would be good. Either way...send it.

It's the throw-out bearing.

There is an indicator, the little fuel pump symbol on top of the gauge turns orange after the first "50 Miles to Empty" warning. It stays that way till I fill up.

Nice! Thanks for the clarification.

Can you confirm if the rev-matching feature can be turned off, preferably permanently? Or at least not default back to "on" everytime the engine is started. I prefer to match my own revs downshifting. I'm all in...but without the rev-match.

Can anyone confirm that the rev match feature can be turned off for those of us who know how and prefer to do it ourselves?

Yup.

At first, yes. But I took the sub off and put 2 pieces of conveyor belt rubber along the backside of the sub. I taped that down to the back of the sub with fabric electrical tape. I also couldn't use the solid table top that comes with the JCR tailgate table. I just took it off and it's an...

Kicker Hideaway 10" on a JCR tailgate table.

This will work: https://www.detailedimage.com/CarPro-M53/Inside-Leather-Interior-Cleaner-P1105/ Start with a 4:1 dilution first. 4 parts water to one part cleaner. If it's still there, repeat or move up in concentration to 2:1.

I saw something today; I was using navigation for the first time since installing the stereo set-up, the voice was pretty loud. I waited until it started to "speak" again and turned the volume down. On the display it said "Prompt Volume." I was able to adjust the Nav voice to 6 permanently, and...