Search results

You said the slave cylinder failed but didn't describe how.. If the slave cylinder was sticking and not allowing the throwout bearing to fully disengage then it could be riding the clutch even if your foot was off the clutch pedal. If this is the case then this condition could burn the clutch...

I use Nato Cans and this nozzle from Amazon. NATO Long-Nose Flexible Jerry Can Spout The end of the nozzle is the correct diameter to open the fuel tank flap so no funnel is needed. I modified the vent to better match my original NATO nozzle so it doesn't splash fuel from the vent hole. It...

I couldn't find ones I liked so I made my own. Got the rubber off Amazon Heavy duty Rubber Mud Flaps and cut to size on my bandsaw. Used fender brackets from a no drill hard plastic set I bought from sticker fab. For the lower mount I drilled and installed a RivNut in the plastic block where a...

I agree with you 100%. Other than the couple wires that are disconnected with relays all factory systems are intact. Its no different than removing a fuse as it’s just a temporary break in the wire. The StarterStopper system is isolated and when the system is activated the relays connect the...

Per a Kelly Book article in 2020 “Sixty-six percent of American drivers know how to drive a manual transmission” My Bronco is a 2 door Badlands with Manual Transmission. Not really worried about it being stolen at home, but being stolen when parked in freeway motel parking lots or having someone...

I still have my ford points to spend from the Bronco purchase. Having the StarterStopper to protect from key theft and relay attacks and perimeter plus to deter break in sounds like a good combination.

It is a manual. Manuals are only a deterrent for some thieves

The StarterStopper Pro has a motion sensor and will sound the alarm just like a traditional car alarm. It also has as a service mode that allows the system to be disabled (using a user set combination) for a set number of days before turning it over to your mechanic. Its available to reserve but...

Don't know anything that would stop that. StarterStopper is designed to protect from car key theft, Relay Attacks, and CAN bus invasion which the pro's also use..

Update: StarterStopper website now shows its Pro model is compatible with Remote Start. I dont think so. The StarterStopper is isolated from the other computers. Unless the secret momentary buttons are pressed remote start wont work as starter power is disconnected. They are developing on a...

I’ve been communicating with an Australian company Starterstopper that manufactures auto theft prevention devices. These work by disabling the starter motor until pressing one or more momentary switches in various sequences of your choice. The switches can be any combination of the three...

Ive had Rock Hard step sliders installed on my 2 door since late 22 and they work great. Even my parents who are in their 80 are able to climb into the back seats. Same robust mounting as the tube sliders. Only issue I had was interference with a front rocker panel fender mount bolt on each...

I can see how this could be confusing but they don't tie the body and frame together. The extra mounting points attach to the body mount bolts on the rubber bushing that attach the body. These bolts move with the body within the rubber mount. The bolts that mount the body mounts to the frame are...

I like it. I did something similar to my Pinzgauer many years ago. Used Dynamat on large panels and then a couple coats of Herculiner over everything. Looks great and really brought the whine from the straight cut gears on the portal axles down to an acceptable sound level. Used to have to wear...

I read this on the forum and tested it out. Placed a key on a milk crate next to my Bronco door. After waiting a minute and making sure not to touch the fob or milk crate the doors unlocked when touching the handle. Locked and waited 10 minutes and still unlocked. Locked and waited 30 minutes...

Window Wings

I want to bring it to the dealer but suppose the sound won't happen while they are listening. And I don't want them to tear it apart and wait a month for parts/transmission. Stay tuned. They don't have to tear it apart to determine if its eligible for TSB repair, only listen to the problem...

Bad idea to attach to the frame. The body floats on rubber mounts and attaching the body mounted sliders to the frame will restrict X-Y movements and place large stresses on the slider body mounts/rocker panels. It would be better to add additional support to tie into the large body mount...

Is there a TSB for Hill Start Assist. Mine sometimes gets stuck on and my Bronco does a nose dive before letting go and lurching forward. Ive been stuck at a stoplight and often in my driveway and have to push it hard to get it to release. Sometimes feels like it's going to slide the front...

A couple weeks ago at Chino Hills Ford. 4 door base with 25K ADM and over 17k of dealer installed options. $80,550. So glad I moved my Reservation from this dealer.