Sponsored

Search results

  1. .............

    I have a similar question about kicker key with stock speakers. My set up is similar minus CS dash speakers. I added Mabbet pods and 6.75 kicker CS but was not satisfied with the sound even after forscan. I have a kicker key 200.4 and ordered plug n play kit 11-6 (kicker key harness, sub...
  2. My Custom 4 Door Sleeping Platform Design -- feedback?

    the base panel and middle panel are both 42.5 inches wide by 32 inches Long. The front panel is 42.5 inches wide and 12 inches deep. The bottom supports are 36 inches long and fit flush against the back of the back seats when they are In the upright position.
  3. My Custom 4 Door Sleeping Platform Design -- feedback?

    Yes this is for a 4 door. I think it’s an awesome alternative to a tent. I’m in South Dakota with lots of wind, so tent camping isn’t a good option, hence this set up. Honestly this seems to be a great alternative to a roof top tent. More secure, better insulated than most RTTs, and WAY more...
  4. My Custom 4 Door Sleeping Platform Design -- feedback?

    This is my set up. Just took it out to install the marina upholstery. Just plywood and 2x6s (actually old 2x7s I had laying around). Need more rise in the back since my seat covers prevent the back seats from folding down as low. Basically consists of a base section, and a free floating...
  5. Sleeping Platform in 4 Door build

    Similar set up I made. I did go with the marine upholstery. Put a piano hinge on for the 3rd piece. This allows the front seats to be usable with section 1 and 2 in place. Then put the seats all the way forward and fold down section 3 for max space. I’m 6ft and can stretch all the way out on...
  6. Controversial subject here.....mud flaps.

    I went with the Rekgen XL for a Sasquatch Base 4 door. I did the fronts only since the back tire spray is someone else’s problem. The XL rekgens look great and provide good coverage for a Sasquatch. Really seamless look and easy to install. The regular Rekgens probably don’t provide enough...
  7. Don't buy Go Rhino rb20 side steps. Updated.

    Just ordered the RB20s (non bed liner) for a 4 door base Sasquatch. I have Rekgen XL mud flaps front only (work great on the sas btw). I really want to keep the flaps with the RB20s. From Bohlmbo’s pic looks like the rekgens should still fit. The rekgens sweep back a little more than the...
  8. Amazon Mockins Cargo Carrier?

    Looking for a reasonably priced roof storage option. Planning to camp/sleep in the 4 door Bronco (22 sas base v6 hard tond want to transfer storage bins and coolers to the rack when sleeping. Probably won’t be doing much driving with the cargo rack loaded down as I will transfer gear back into...
  9. Build week 10/3/22 Group

    Ordered 11/15/21. Base Sasquatch 2.7. 10/3 build week. Dealer said likely mid November ready to pick up if all goes as planned 🤞


Top