Search results

Definitely will. Have an order placed for them, but after calling some places, it sounds like there is a national back order of about 6-8 weeks.

I know a lot of people put Kenda 35x10.5R17 on the Sasquatch broncos. I never used their tires before so I am hesitant to. But I'm sure theyre fine. I did find that Toyo makes the AT3 in the same size, 35x10.5. None of the places local to me carry them but I'm gonna try ordering a set.

The Sas wheels are 8.5 which has me concerned. It doesn't really seem like anyone has mounted these tires on the stock sas wheels. Found this on an FJ Cruiser Forum. Maybe it'll be fine?

I am interested in putting pizza cutters on my stock sasquatch bronco. I like the look of the 255/85R17 Mickey Thompsons, but after doing some research, I am starting to doubt they will fit the stock sasquatch wheels. Does anyone know if there would be any issues?

Hi sorry for getting to this late. Yes I took down my Etsy listing temporarily. While the mass majority had no issues with the design of the tensioner, I had a couple users reach out to me, showing that the tensioner was interfering with the operation of the center console lid. I spent some...

I ended up using black silicone to seal it. I removed the panel and added a bead of black silicone when the seal is meant to touch the panel and then cleaned it up from the outside.(Also switched to a soft top since my last picture)

Unfortunately shipping would be too expensive. I would suggest downloading the STL file in the link below and providing it to a 3D printing service located in Canada on Etsy. It most likely would be more cost effective. Just be sure to request a thermal resistant material like PTEG, ABS or ASA...

Thank you all for the orders! I am glad I have been able to do something positive for the bronco community. I hope they help those who order! I have received very positive feedback on the shims and run them in my own bronco without issue. But if anyone has any questions or concerns feel free to...

I paid 74 for the switch with both the front and rear fogs! I use the rear switch to switch my front fogs to amber.

That looks like the Brandmotion Mirror. Highly advise avoiding it. It is definitely not worth the price. I personally was not satisfied with mine. It was too dim to use during the day and lack a ton of features for the price, like parking monitoring and loop recording. Others have issues with...

Has anyone been able to get the fog switch working with on AUTO with the DLR? I know there is a way to enable to the fogs to be always on with the DLR but I want to be able to toggle on and off the fogs with the switch in this mode. Haven't been able to find a way to do it in forscan.

Interesting. Looks like it might be for alignment or something. It does have some numbers on it, but none seem to be associated to a part number

Hello, I recently brought a second hand OEM soft top that has a broken tab that attaches to a stud on the drive side cargo area I was hoping someone could help me identify what this tab is for and if there is an associated part number for it. I could not find any information for it online...

I have been following armadillo designs for over a year now, and as a company, I have been very impressed with their transparency with the design and manufacturing processes and their willingness to listen to feedback. On top of that, they look like they are producing a quality product. I am...

Just in case anyone is still interested and does not have a 3D printer to print these on their own, I have decide to list them on Etsy. Decided to go with Etsy so I have a place to list other functional prints and designs that I am working on. Link can be found here...

Yup this is correct! The design wasn't meant to pop the lid open all the way up, rather to keep the lid from falling under its own weight. With the shims install in my center console, the lid pops up maybe a third of the way. When I manually lift the lid, it stays in place where i leave it or...

Here is the thingiverse link for anyone that has a 3D Printer and wants to give them a try https://www.thingiverse.com/thing:6696746

The slot is .05in deep, so it is shimming distance is .25in

Glad you all like it! I hope it helps some else. If you make a better model, please do share it!. Here are the basic dimensions: The slot for the spring has a 0.1 in diameter, but I did add a taper to it. The walls have a thickness of 0.03 inches. Once I able to I will also upload the STL to...

I didn't want to go through the trouble of removing the springs and cut them up. So I thought I'd share the solution I tried. I 3D printed a riser with a notch to add tension to the spring. I am pretty satisfied with the result. The center console does not fall back down on itself like it used...