Update: UPR Dual Port Catch Can - Our New 2026 Outer Banks Build!

[LethalPerformance]

Hey all!

We just picked up a new 26' Bronco, Non-Sasquatch Package, Outer Banks from our friends over at Weikert Ford to start a new build here at Lethal Performance.



What better way to transform a Bronco than with some suspension and wheels:

We started things off with a more budget-friendly lift kit from our friends over at Rough Country, with their 3.5" Lift Kit.

Our friends over at Vossen hooked it up with their HF6-5 wheels in a 20x10, -18 offset spec., wrapped with Mickey Thompson's Baja Boss A/T in a 35x12.50.

We also added on UPR’s 50 Cal. Bullet antenna to get rid of that ugly stock antenna, as well as their BOV Adapter to increase the fun.

We’re just getting started with this build, so check out the page and follow along as we get this thing Lethalized. Next round of mods include some exhaust from AWE Tuning, a catch can from UPR Products, and possibly some tuning?

Sponsored

 

[LethalPerformance]

Hey all!

The next batch of mods is in for our build, starting things off with UPR's Dual Port Catch Can!



We got this kit installed in less than 30 minutes thanks to UPR’s pre-assembled, perfectly cut lines with OE connectors.

The installation process itself couldn’t be easier and only requires a couple basic hand tools (7mm socket, 8mm socket, ratchet, and a flat head screwdriver) even if you get stuck with the dreaded orange PCV fitting (depending on model year), which luckily we didn't. UPR has a solid solution to the orange fitting, if you have it installed on your Bronco, so no fear there!

These catch cans are a must-have for anyone who plans on keeping their Bronco long term & especially those who are turning up the boost with a custom tune. They are designed to keep your intake tract clean and clear of any nasty oil mist from the PCV that will cause buildups over time and ultimately, killing your engine’s performance & efficiency.

Check out the full video, the UPR Dual Port Catch Can, as well as the rest of the build process on our 2026 Bronco Outer Banks here:

https://www.lethalperformance.com/builds/2026-bronco-outer-banks#video-section