A distinct look for your Bronco: PTYYDS Trail Sight Lights

[ptyyds]

Hi Bronco fam!

If you’re looking to add a distinct look to your Bronco, our Trail Sight Lights are an addition to consider. They are specifically designed for the 2/4 Door 2021-2026 Bronco models (Not compatible with Bronco Sport).

These units utilize a die-cast aluminum alloy base, which provides a sturdy defense against rust and corrosion. A water-resistant lampshade covers the top, protecting the internals from the elements. It’s a setup built to handle rain on the trail without losing its finish over time.

The distinctive amber lighting gives your vehicle a unique appearance and makes it more visible on the road, especially in low-visibility environments. They don’t sacrifice the original utility, as they still function as tie-down anchor points. The installation is no-drill and plug-and-play, and the kit comes with all the tools you need.

Click here to check them out: Trail Sight Lights

Sponsored

 

[SHANUT]

I noticed when you use that link it also shows available fog lights for the upgraded factory bumper. The installation video shows a plug and play situation, but I’m wondering how you get all of the functionality out of those fog lights since the bronco doesn’t come with fog lights with that upgraded bumper and no switch comes with your kit.

 

[CliffordTheBigRed]

I would buy these if they were purple

 

[Wolfgang VTS]

I would buy these if they were purple

Dupli-Color MC204 Dupli-Color METALCAST Anodized Color | Summit Racing

 

[MFM01]

Do they function as turn signals as well?

 

[hellerjames]

When you do this change and plug your connections in please use some dielectric grease on the connections. I learned the hard way and almost had to replace the expensive headlights. Water got into the connections and corroded the terminals.

 

[PolyTect]

Do they function as turn signals as well?

This^^

Coming from a car with turn signal lights in the mirrors, having something someone can see when front and rear are out of view woukd be great. The fact the mirrors dont have this astounds me.

 

[Wolfgang VTS]

Do they function as turn signals as well?

This^^

Coming from a car with turn signal lights in the mirrors, having something someone can see when front and rear are out of view woukd be great. The fact the mirrors dont have this astounds me.

https://www.amazon.com/vdp/0e19d35f...B0GLZBVRVR&ref=cm_sw_cp_r_ib_dt_uK2EECzVaH437

Skip to the end, right about the 2:40 mark. It appears as though they do have a sequential signal.

 

[PolyTect]

https://www.amazon.com/vdp/0e19d35f...B0GLZBVRVR&ref=cm_sw_cp_r_ib_dt_uK2EECzVaH437

Skip to the end, right about the 2:40 mark. It appears as though they do have a sequential signal.

Front lights do, top ones don't. So close!

 

[G1D1UP]

I would buy these if they were purple

Purple? What!? Okay, now you have to explain why, or show a picture of your rig so we can all make sure you are making the best decisions for you and your Bronc...

 

[CliffordTheBigRed]

Yessir she is at the wrap shop right now! Also getting lots of upgrades. I can't live with the Stroppe colors. This is just a preview, since you asked...

 

[ptyyds]

I noticed when you use that link it also shows available fog lights for the upgraded factory bumper. The installation video shows a plug and play situation, but I’m wondering how you get all of the functionality out of those fog lights since the bronco doesn’t come with fog lights with that upgraded bumper and no switch comes with your kit.

The fog lights connect to the headlight connectors via the included wiring harness and are controlled by the main headlight signal. This ensures they stay synced with the headlights. This way, it doesn't need a separate switch. I hope this helps!

 

[ptyyds]

Do they function as turn signals as well?

Yep, they flash in sync with the turn signals.

 

[ptyyds]

I would buy these if they were purple

Technically, purple is doable, but we haven't seen enough demand yet to justify a launch. We'll keep it in mind!

 

[ptyyds]

When you do this change and plug your connections in please use some dielectric grease on the connections. I learned the hard way and almost had to replace the expensive headlights. Water got into the connections and corroded the terminals.

Great tip! Thanks for sharing your experience!

Sponsored