Fab tech lift kit w/ reservoirs installed

[Brandon113]

I got the fab tech lift kit the 3-4" with remote resivours the uca and rear track bars

Sponsored

 

[BAUS67]

Cool, now 'ya just need some 38s and a set of beadlock rings for those Squatch wheels.

 

[Brandon113]

At some point I was going to look into bigger tires but I need some with flatter side walls there's not allot of room in the front between the tire and the UCA

 

[BAUS67]

Hence why I said beadlock rings. That takes your 8.5" wheel into a 9.5" wheel and moves it outward..............

https://www.bronco6g.com/forum/threads/bigger-meats-2-door-bronco-rolling-on-40s.68370/


@BigMeatsBronco is without much lift so he did alot of cutting to put 40s on it. My point is more about the wheel and how it pushes it out. helping to keep it clear of the UCA. Plus not all "38s" are the same........


These BFGs are 39/13.50 but if you look at the specs they are 38.5 x 12.50 which also help, BMB used Geolanders they are wiiide.



BFGs 13.50 (section width is sidewall to sidewall).....................

VS. the Geolanders 13.50..................

So combine the beadlock rings moving the rim width out. and running a "narrower" 13.50 would help keep the tire away from your UCAs. Check out other posts by BMB he has done ALOT to his FE with a conservative parts approach.

 

[Brandon113]

Oh dang I didn't know that! But I'm picky with rims I haven't put any thought into different sets there's not much that I like

 

[BAUS67]

I personally like the Squatch wheel with the beadlock ring. I'm not into the whole wheel thing either. There are a few I like but not enough to pay the money when I like the Squatchers.

 

[Brandon113]

Those look beefy

 

[BAUS67]

That is just another shot of BMBs FE from the thread I posted.

Sponsored