Recent content by wintoon

Everything works as expected. The rear locker gets activated as expected, even by GOAT modes automatically. Light in the hero switch follows the locker state. There is no indication of the locker condition in the instrument panel, but that does not bother me. Its pretty good. As an added...

Just FYI I myseld did this and did not re-gear. I have a 3.73 bronco with a rear locking diff. It works well. Unless you are climbing some real hardcore rocks you probably won't need it.

I hope these photos clarify things.

Put your passenger side seat all the way forward. Tabs go on top and towards the inside of the vehicle. Align the front tab with the little hole in the seat and then push in all the way to the back. Back one snaps in place. The holes are on the seat rail itself, not the rail mounted on the...

Hello guys. I came up with a solution for this. I made a small 3d printed model to insert to the seat rail. Model is this: This is inserted into the seat rail. There are two holes (front and back) on the seat rail like so: This piece is designed to "clip" into these holes in order to stay...

After seeing some videos on youtube I can confirm that besides the fact that this method DOES activate the rear diff and it disables it when using trail turn assist, there are no other indications besides the hero switch that the rear diff locker is engaged. Some other config is missing in...

Hello all! I have done all this and can confirm it works perfectly. I enabled Rock crawl mode and when it is selected it automatically engages the rear locking diff. I think at this point I just might be the only person in the world with a bronco setup with 3.73 gears and a rear locking diff...

Thanks for the excellent research and write up you did! Could you confirm if this is "fully" integrated? Does it show up in GOAT modes, and does it turn OFF automatically if you turn on the trail turn assist? Thanks again for all your hard work.

Thanks!

Not an option here. It was either the "nice" OBX or the "rugged" BL. I went with nice because I don't do much off-roading.

Thanks. Do you happen to know if there are any switched power fuses in the engine bay?

A fuse tap in the engine compartment would always be on correct? All fuses are always hot I believe? Also, in general, if your alternator is working correctly you should have a pretty steady voltage coming from your engine I believe. There's always a difference between battery voltage and...

Thanks! That's a great idea.

Hello everyone. I am starting a google sheet where we can all (if we want) post our VIN and description (features) of our Bronco. The hope here is to have a database of VINS that will allow us to figure out the Forscan codes to activate different features. I have filled mine in, if anyone...

If anyone wants to help please post your FULL configuration from: https://www.motorcraftservice.com/AsBuilt I need OBX high package with trailer and rear locker. I will use this to compare to my own configuration to see all items that need to be changed in order to enable the rear locking...