WheresMyBronco's latest activity

Yes.

Was it just poor door alignment that was causing your passenger door to be hard to open/close?

Is it on a sticker? Probably just used in manufacturing and can be removed

If you wanted to go the cheap route and like your factory rails: Remove rails. Remove front end cap. Cut 1/4" off. Touch up with paint...

If these are the running boards you currently have, check out this thread...

Best thing you could do is test drive one if possible. There are a couple ways to reduce road noise with weatherstripping and whatnot if...

I think Ford also has their own solution/replacement part for this, or at least I remember seeing them posted on here before. Sorry I...

Here’s the pic from the front side

Bought a 3rd key months ago but finally got around to programming my third key, easy peasy. Thank you for the writeup and links, and...

Do you turn on your Bronco before your door is closed? When my doors are open and I turn it on, they go up for a second then come back...

Be grateful, you're now 25% of the way done with your conversion to the squared off heritage flares

Always appreciate a nice giveaway

Is your window rolling up to the "closed" position when your door is opened? Might be a different issue if that's the case. Have you...

If it's the same as the side ones right next to it (inside/flat), they are M8 x 1.25 x 25mm

Swapped in the new motor today and everything's working fine now. Here's the driver's side motor in case anyone ever needs it...

Not when you have a toddler running around 😉. I have my daughter daily.

Maybe melt a hot glue gun stick onto the center cap and try pulling it after? Kind of like those glue gun dent pulling kits

:sadface:

There is zero comparison between these two in the power department. I just did a trip from Colorado Springs to Yellowstone and back and...

I started with the basic Overtrail+ and added every option, all installed accessories, additional accessories, addons, etc. the price...

Bought this for my two-door and used it for a few months but I never got comfortable with it only being strapped instead of bolted in...

Go to AutoZone or any other auto parts/home improvement store and get 3M or scotch brand double sided tape

I don't think there's a coating but duct tape can leave a residue that can be annoying to take off and possibly cause some damage. Why...

After missing the order banks in 2022 I finally was able to get an order in August of last year and as of last week I officially have my...

These were the two caps I ordered, would just double check them again to be sure they're right M2DZ-17D743-EAPTM, M2DZ-17D742-EAPTM

For the handles, I've had covers like these for 1.5 years with no issues https://a.co/d/j7ybbis Was cheaper than buying painted ones...

My Wildtrak is coming along…. Finally got my Oracle flush mount tail lights installed and couldn’t be happier. Went with the Method...

Looks good. Would add a lot if you replaced the handles and mirror caps with gloss black ones too.

As of Sunday I am now a WildTrak owner.

Try adjusting your window using the bolts on the bottom/sides of the door (under the rubber plugs) There are some instructions...

Just a heads up in case this did not fix their errors. Make sure the front grille does not have any large bugs stuck anywhere. This has...

If anyone ever has this same issue, I was able to manually lower/raise the window by doing the following: Remove the door panel cover...

Yep, mine is only 1.5 years old and I barely have 11k miles on it. Thankfully Ford parts are usually cheap, but it's still a bummer that...

Well, I just ordered a new motor for $40 (including shipping). It's a warranty issue but I figured it's better than dealing with Ford...

My driver's side window decided to stop working entirely this morning, so now the windows are stuck over the weatherstripping instead of...

There are a lot of conditions that need to be met for the auto start/stop to work. It's in the manual somewhere but it's it's probably...

Nice, just downloaded it on my Android and confirmed it has dark mode. I think it goes based off of your system settings so if you...

I think im feeling satisfied with my lighting now, maybe a 30” driving pattern light bar for the bumper, but not soon. i Went with...

If you are looking for an inexpensive way to reinforce your tie rods, we have a solution! We designed ours to fit around the factory...

https://www.harborfreight.com/6-led-off-road-spotflood-combo-59237.html I have never had a problem with Roadshock branded LED pods in...

I get that HF is an easy target, but honestly most of their stuff performs just as good (if not better) than most of the bigger brands...

I know absolutely nothing about roof racks, but I've seen people wrap paracord or something similar around the bars to reduce whistling...

I finally decided to take the time to write up my flat towing setup with the bronco. Shout out to others in this community who have...

From my '24 Badlands Sasquatch. I did the Goose Gear delete on day 1. Hate to throw them in the dumpster. Too big and heavy to ship...

Nice find. I don't believe there are any specific issues with that year/model/engine that would make someone let go of it after doing...

IMO the Bronco is pretty comfortable in terms of the seats, layout, ergonomics, suspension, etc, but if you're going to be driving that...

That's a neat idea. I'd be interested in seeing the matte black or ghost camo armor on a black Bronco if anyone has that (couldn't find...

Probably not the best quality, but it's a good deal for someone who's looking to just stuff sound absorbing foam in between that and the...

Those look great, nice job

I've jumped tons of cars, don't need to be savvy with electrical stuff to do that. Just didn't know I could use a portable jump starter...