Sponsored
razehound's latest activity
-
razehound replied to the thread Armorlite Floor Drain Plug Issue.I'll try looking at this later today. From what i remember this does kindof describe the issue, seems like the cap had to sit way down... -
razehound reacted to NC_Oak's post in the thread If you could get rid of one ownership headache, what would it be? with
Like.
some of those can be eliminated with forscan, but most importantly (at least on mine, who knows if this things all work the same) BUCKLE... -
razehound replied to the thread If you could get rid of one ownership headache, what would it be?.Yes I'm planning on starting my forscan journey next month... Good tip! I'll try to keep that in mind
-
razehound replied to the thread Bottle Jack Lifting Points?.Oh! Now that you mention it that's definitely an interesting design choice. I may have to do the same. How intensive of a process is that?
-
I don’t recommend this, but it’s what I do.
-
I installed my bolts facing the other direction so the threads weren’t hanging down in the rocks
-
razehound replied to the thread Bottle Jack Lifting Points?.Thanks! It seems that my bolts extend a bit further than yours do: I'm coming up with some crazy ideas but I think I can make it...
-
-
razehound replied to the thread Bottle Jack Lifting Points?.Thank you!
-
razehound replied to the thread Bottle Jack Lifting Points?.If only someone made such an adapter for the front tires! @Brian_B Could I get a look at what your jack/extension pad looks like that...
-
I actually reduced our clearance via trailing arms so we have a great jacking point now. But those retards with portals gotta get creative.
-
razehound replied to the thread Bottle Jack Lifting Points?.Okay Yeah that would be what I am aiming for. A way to grab that LCA lower surface. So you're catching the more central bolt yes...
-
razehound replied to the thread Bottle Jack Lifting Points?.Gotcha. Right now Im really just trying to figure out if its safe to lift from the LCA/hear that people actually do it. I can figure out...
-
razehound replied to the thread Bottle Jack Lifting Points?.Looking to get the wheel off the ground for a tire change. Obv can use the axle for the rear, but I believe at the front-most frame...
-
-
razehound replied to the thread Bottle Jack Lifting Points?.Can you throw a bottle jack under the lower control arm for lifting the front tires? With a stand under the frame obv Its just to use a...
-
I had one that did that originally in the back seat, but it settled down after a while. Was like the captive strap was stiff and pulling...
-
razehound replied to the thread Armorlite Floor Drain Plug Issue.Yes I reached out to them just before making this thread. Trying to cover all my bases with information/help
-
razehound replied to the thread Armorlite Floor Drain Plug Issue.I agree that the captive strap does seem to be contributing. Not sure if just trying to work it back and forth would increase pliability.
-
razehound posted the thread Armorlite Floor Drain Plug Issue in Interior Modifications - Sponsored by 3Wliners Floor Mats.So I installed my Armorlite floor this last weekend, and everything went great. Wasn't too hard to install, everything lined up...
-
razehound replied to the thread If you could get rid of one ownership headache, what would it be?.When I start up the bronco with the doors off, I'm greeted by a thousand beeps and warnings. "door system not connected" "passenger door...
-
razehound replied to the thread Good road tire without an aggressive tread pattern - recommendations?.Yokohama Geolandar A/T4 should work nicely for what you want without going all the way to an AS
-
-
razehound replied to the thread New member tire and wheel questions….Word of advice, stick with 17 or 18 inch rims. Maybe I'm just too used to seeing off-road broncos, but when the wheel gets big and the...
-
-
today it will save one profile per vehicle, we can certainly look into adding more!
-
razehound reacted to Bronco Jim McNulty's post in the thread NEW Flashcal+ Bronco Support! with Like.
I request ability to change heated seat temperature. Thanks.
-
razehound replied to the thread Ford Performance Calibration 2.7L for 37’s speedo calibration?.It does seem odd, probably just because you can do it from your phone app?
-
razehound posted the thread California Deepsleep Overland Leveling Mats BRAND NEW in Off-Roading, Overlanding, Camping, Recovery.Picked these up as a backup but by the time they were delivered I already had a platform! Never taken out of bags, let alone used. IDK...
-
-
razehound replied to the thread NEW Flashcal+ Bronco Support!.Yeah i already know Id buy it and then find out the one setting i really care about requires a constant connection...
-
Can you provide which ones will remain programed or not? Whichever list is shorter to save keyboard ink....
-
razehound reacted to RoverDude's post in the thread Forscan changes to activate 25+ trailer module? with Like.
See below for 2025 setting. The TRM is much larger (more lines/ different, it a diffrent firmware module for 2025+) also The ipc is...
-
razehound replied to the thread Interior Lights - Zrebrio Grab Handles with Led Lights.I believe those are a copy of the Broaddict ones...
-
razehound replied to the thread How to Connect Compressor to Manifold.uhh what? Harbor freight worked just fine, literally screw out and screw in (with PTFE ofc)
-
razehound replied to the thread How to Connect Compressor to Manifold.That would be this one yes? And what exactly is the shut off for? Its my understanding that to stop to check the pressure, you just...
-
-
razehound posted the thread How to Connect Compressor to Manifold in Off-Roading, Overlanding, Camping GEAR -- Winches, Onboard Air, RTT, Tents, Coolers, Recovery, Snorkels Etc..Just got in my air compressor and 4 tire inflation/deflation system, but theres an issue: they both have male ends How do I hook it...
-
-
razehound replied to the thread Shorter Sun Visor?.Yeah mine also sucks. Just wierd geometry on the visor
-
razehound replied to the thread What tires does everyone run?.Has anyone ever used Firestone Destination XT's? The tread looks really good and its a lightweight load E, but I cant find any reviews...
-
razehound replied to the thread Creative Solutions to level the Cargo Lip for Sleeping.I agree its hard to find something that isnt super labor intensive. What kind of gap filler do you use? I was just going to use a pillow
-
razehound replied to the thread Creative Solutions to level the Cargo Lip for Sleeping.That is a great point, yes the rotopax would be under the foot end, but thats also how you climb in and out... Good catch!
-
razehound replied to the thread Creative Solutions to level the Cargo Lip for Sleeping.Idk its not nearly cramped enough back there to maintain the illusion...
-
razehound posted the thread Creative Solutions to level the Cargo Lip for Sleeping in Off-Roading, Overlanding, Camping GEAR -- Winches, Onboard Air, RTT, Tents, Coolers, Recovery, Snorkels Etc..Don't really want to spend $80 on leveling pads from Deepsleep. Feels wrong to buy and bring gear whose only purpose is to fill space...
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).+35 - 19 = 16mm effective offset And yes, I agree that 0.6" of difference isn't much to the eye, but I'm not choosing my wheel setup...
-
razehound reacted to BD6G's post in the thread How to run Method 703s on a Bronco?? (also BORA spacers) with Like.
These are sold through Ford Performance it was a partnership with Method to make the wheel hub centric to the Bronco. It does limit your...
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).lol you should see my other posts... haha obsessive is the word I use
-
razehound reacted to Magic88's post in the thread How to run Method 703s on a Bronco?? (also BORA spacers) with Like.
Factory tires, sasquatch goodyear 315's You're way more particular than I was, 🤣
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).11.5 wide tires? the math doesnt check out. You lose 0.5" of outside width, and gain 1.2" from the wheel. so you're 0.7" past where the...
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).Yeah unfortunately the 703s only come in a +35 or +0, and +0 is way too wide for me. I'd love a +20 or +18, but I value the bead-grips...
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).I see. Very helpful information thank you! Puts me in a bit of a pinch. I really was looking for 0.75" spacers in order to get the...
-
razehound replied to the thread How to run Method 703s on a Bronco?? (also BORA spacers).Are those different from the ones available through method...
-
razehound posted the thread How to run Method 703s on a Bronco?? (also BORA spacers) in Tires, Wheels, Brakes.So I'm looking to switch over to method 703s from my stock wheel. Its my understanding that these are some of the most popular offroad...
-
razehound reacted to 87-Z28's post in the thread Looking at Badlands vs Sasquatch Wheel/Steering Geometry with Like.
My post was just trying to clarify the whole scrub radius thing. Not trying to spread fear about steering and scrub radius. The hoss 3...
-
razehound replied to the thread Looking at Badlands vs Sasquatch Wheel/Steering Geometry.Thank you, this is incredible. So then keeping a "closer" offset with larger tires is not necessarily better than otherwise. It looks...
