Recent content by paxfish

I'm not seeing the 4dr rack on their site anymore. Did they stop selling it?

Getting tired of my fly rods banging around in the back It turns out 2" PVC hold fly rod tubes very snug. Also, we have some M8 inserts built into our roll bar. I ripped down the length of the PVC on the table saw, cut to length, mounted on a piece of plywood and bolted that to the roll bar...

Thanks everyone for this thread and your contributions. I used stock viscosities (the Bronco lives at 9000 ft = cooler). At 25K, front diff fluid was a bit dark, transfer case a bit darker. Rear diff looked great.

Chrome or satin silver please!

Based on years of backcountry experience, I'd say Matt was suffering dehydration. Gravelly voice, disoriented etc. Very dangerous game in those temps.

Great summer in the Southwest!

Our old max cool served just fine. It was supplanted by a nearly new Yeti yesterday for $200. Frickin thing is 40 pounds empty!

I think they have. My June 2022 hardtop has been great. No leaks or glue issues. They come off and go on as expected. Overall, the truck has been excellent. I did chase down and resolve a small leak in the rear underfloor storage compartment. That was a design issue.

Helped my buddy Jim with his resto- boat. He is taking it to a competition this weekend. It's a 1960 15' Glastron converted to electric. He can run on plane for about 45 minutes at about 100 amps. Burst to 200 amps at about 18 knots using two big lithium batteries.

It might. I just put my doors back on and one window was not behaving. I reset it and it was fine.

Try the reset procedure. Roll window down and hold the button for 5 seconds. Roll it up and hold the button for 5 seconds.

I must admit, I do carry a spare tie rod and wish the raptor steering gear was standard across the line. But oh man, the ride is amazing in our Badlands...

Do you have a long grade heading toward your house. I notice a smell after shutting down from a long grade like up to the trailhead. My previous F150 EB did it as well. The turbos get red hot!

Never welded at all? Dammit! You're making me get under the truck again!

Pull the back floor, remove the plastic tub and seal with weatherstripping or silicone caulk. Reinstall. I also added two sheet metal bolts on the forward edge. Mine was leaking under the forward edge of the gasket.