Recent content by Ninjaroz

I fixed my issue. If you run into fading issues could be the wires from radio to amp. I used 18g initially (do not recommend). I would highly recommend keeping that run as short as possible and use at least 16g. I used 12 myself to be safe and its working great now!

@RWK I originally had your setup with cross overs when I didnt have the key 200.4.Before reading this keep in mind I'm still having problems myself. I have 6.75 woofer in kicks and a 1 inch tweeter in dash. It is alot louder when compared to what it was pre bi-amp. What i did was only pass the...

Thanks for the quick reply! Yep fader is set to off on kicker key here are my key settings but I will double check and update if not: Power is dc Fader off Compression off Bi amp on The 2 other kicker settings are on i don't remember names Cross over 80hz Radio detect is on Power 14g directly...

So I just tried this and looking for some advice. I have a key key 200.4 and 500.1. Created my own harness per another thread and running in bi amp mode. Having some weird problems with the kicker key 200.4. First it sounds pixelated unless I change balance all the way to left or right and my...

Hi Chris, Awesome Jami did reach out to me. I hope we can get this resolved. Thanks!

I found StickerFab here so I think its appropriate I indicate my experience thus far here for others that may find this thread. I ordered a few items for my badlands bronco January 31st order # 50792SF. 2/11 Reached out to ([email protected]) about exchanging my requested items since it...