Sponsored

Recent content by mikegt98

  1. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    Can anyone confirm that the TRM module needed for a 2026 is m2dz19h332a

  2. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    Well after I put the TRM fuse back in all the sensors have now started working. Go figure. If you know the right TRM module number for a 2026 model let me know and I’ll get that one ordered and replace it.

  3. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    Yes I used the prior saved data and then downloaded the code to verify they matched. It all matched. So I pulled the TRM fuse and the APIM and PAM modes no longer have a fault. Also when I put it in gear the parking sensor fault doesn’t show up either. However the sensors are not picking up...

  4. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    I restored all settings back to factory specs and parking sensors still don’t work. No faults but getting error code U2101:00-08 for APIM and U2101:00-28 for PAM. Both say “Comtrol Module Configuration Incompatible”. Would the wrong TRM module cause this? I have confirmed all codes are correct...

  5. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    I restored all settings back to factory specs and parking sensors still don’t work. No faults but getting error code U2101:00-08 for APIM and U2101:00-28 for PAM. Both say “Comtrol Module Configuration Incompatible”. Would the wrong TRM module cause this? I have confirmed all codes are correct...

  6. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    Also if a newer TRM module is needed do you know the part number needed. Also if a new module is needed would you know what settings need to be reverted to get the parking sensors back working

  7. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    Well dang. Does that mean I have to buy the entire kit again to make it work or can the module be bought separately? Or can the one I bought still work with my 2026?

  8. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    VP2DZ-15A416-B is the tow kit I installed. I’ll have to open the side panel again to get the module number installed on the fender wall. I’ll do that this afternoon and repost with the number. Only error code I have is now a parking sensors fault that appeared this morning. Sensors worked fine...

  9. DIY Factory Tow Package using OEM parts with Forscan As-built Data (without error codes)

    I bought a 2026 badlands and installed the hitch and updated the PC with the parameters as listed. Now my parking sensors have stopped working and the tow screen is not available on Sync so I’m sure I have done something incorrect. Does anyone know which settings would have disabled the parking...
See more


Top