Recent content by Les Korcala

That is good question not sure if these numbers are correct? I know tgat my XL RTT weights around 160 plus 80 lb i believe is prinsu plus 70 lb my fly rod holder so here its about 300 lbs By the end of the day if we ad our weight to sleep on additional 300lb That would be close to 600-700 lbs...

so far they are working perfectly. thanks

You’re welcome If you will be using Prinsu rack let me know I have documented entire build since they did not have good instructions on their webside specifically to fit bronco

Here are few images

Hello I have Falcon XL and we picked Prinsu aftermarket roof rack and mounted to it It was easy 3-4 hrs job some 80 bolts Looks great nice and low profile Bit pricy at 1200$ but very good quality

I forgot to mention I was going to wire ground wire from all 4 roof lights to good ground in the engine area but it was impassable to run the wire down the windshield and than under the hood So what i did was i solder all 4 negative wires to single one with good lug and mounted right where roof...

Video of Axobeam 360 Pro 7 “ offroad lights

After delating rear seats and replacing new audio system in my car it was time for another projects installing some off-road roof lights Plan was to use 2or 3 round rally type spotlights in the bumper of my bronco but with factory skinny narrow bumper it was impassible to dit the lights i like...

The problem is that even with cable they run there from the switch box for easy connection its very thin and with decent high current and 30A fuse ( used in my lights ) you want to be save there and not melt wire and set car on fire Just like audio Ford was cheap and used worst speakers and...

Yeah , there are two ways to do it , drill and no drilling in windshield seal ford left cool notch for the wire to push trough but my question is how to narrow down to single 2 wires where 4 lights come with their switches , 2 relays fuses and more , just too many wires haha I don’t believe I...

After seeing several videos I have good idea how to or where to connect wire from the roof lights trough the bracket corner of the windshield area to the glove box and kick panel I was going to use as many mentioned 1 st switch on the control panel since has thicker dia wire , it’s what I...

Well, it took me good 2 months to upgrade my audio system and ditching Vietnamese paper woofers out of new Bronco. Well worth project ! I started with sound treatment entire car accepts under front seats. Since I am audiophile and at heme I have build specific listening room I wanted to...

Yeah i figured out before you have mentioned I only had this car for like 3 months and hardly driven and forgot what menu dis look like since i had all striped. Just glad there was nothing seriously messed up with my wiring I am totally blow away with performances of these components just Next...

My mistake again! I did not realized that you have to select Ford icon to access Ford settings All seems to work perfectly now No i will do some presets on to main amp and up to next project