Recent content by Hockey13

No neither one of those is normal. The latch is there for a reason. I'd reach out to Broaddict.

Mine rattled too so I added the extra rubber bumps as described in the manual. That eliminated all slop the drawer had ina forward/back (in/out) motion.

That is correct, they are free floating. I put small rubber bumps on the back side in case it were to make contact. Also, I took cloth black hockey tape and put that along the bottom edge since the panels are steel and not perfectly rounded. I cut it freehand with a cutoff wheel then tried to...

I'll have to do some digging but it was from Amazon. Full set top and bottom was probably like $250... But I'll have to check.

1) The factory flooring in the cargo area does have to be removed and can't be used with the deck. Per Broaddict, they are making a cover that will be compatible with the deck. 2) No, it can't. So if you wanted to put valuables below the deck, or the lower slide out storage area, it would be...

For context, I originally ran a Tuffy Security Drawer setup. I loved that thing. Super solid, locked everything up, and just felt bombproof. But life changed—we had twins—and suddenly cargo space and flexibility mattered way more than security. Our Bob double stroller is massive, and with the...

What was the amount breakdown? Xxxx BSG and xxxx redline?

I was looking with the same parameters back in 2022. I ended up going with Tricky’s compressor and made my own 4-way lines. The thing with premade 4-way lines is that they’re crimped and a mess to untangle and keep neat (I’ve got a little OCD). Here’s what I did: #1: Buy the Tricky Compressor...

Recently purchased a "Labeless" Iceco VL45PROS and noticed the lid would rattle. Although I have enough noise being a soft top, the rattling was noticeable. The source is due to the metal pegs that the lit locks onto. The lid clasps appear to be plastic. There is minimal play which allows...

Link?

I installed the 10" in my 4dr. a week ago. I used u Kilmat 100mil and covered almost the entire box prior to installation. That was an error... The box is so precise, the thicness of the sound deadening prevented fitment. I had to cut and peel sections off in locations such as the bottom below...

Is it possible that this is a designed so if something happens it doesn't fully drain. Ie of there's a leak (obviously depending on the location of lead) it won't run completely dry?

About to change my rear differential fluid and would like to replace the cover with one that I can drain and fill via plugs. Ford Performance: ~$187 and has drain out the bottom plug and fill plugs. Also, allows the brake line bracket without modification/etc. ARB: ~$187 and has drain out the...

Do you have any pictures? Still trying to upload mine but need to get into a PC first to do so. 🤦