Recent content by Dannebrog53

Thankfully I kept all the takeoff parts and if I have problems in the future they’ll be going back on and my 68 Bronco will be the primary crawler

I definitely have the dowels and everything fit snug, a few “taps” with a dead blow hammer and they were on.

@zuke you only need to anchor the safety wire if you’re doing a single bolt. With two or more they anchor each other. That being said @SierraBronco brought some key points to my/our attention regarding the problem and that is the bolts being stressed from the loading on the brackets under...

I do have the dowels and thanks @SierraBronco for the info. I’m always learning. We appreciate the time and detailed information you provide in your posts and responses👍

I obviously haven’t done it yet, the photo is just to show that the bolt heads are accessible and can be safetied

I dont know why I didn’t think of it until yesterday but what about safety wiring the mounting bolts once installed? Granted it won’t ensure they maintain the torque they’re installed to but it’ll certainly keep the bolts from unthreading. Aviation and racers have been safetying for decades and...

I realize it’s a little early to make a determination since the Turn Off-road portals are just now getting into consumers hands and on their rigs. That being said any thoughts on their brake mount design? It would appear that being machined into the housing should eliminate the bolt loosening...

Thanks @Ducati1098 I’m always learning from your inputs and feedback!👍

Did you swap a Raptor dash panel in as well? Did you try driving it and trying an up shift and downshift using the paddles? The wiring for the paddles is already installed, so it should work, wonder what the issue could be?

You don’t need to make any forescan adjustments. I have a 2022 Wildtrak and installed the BRaptor paddle shift steering wheel in it. What you need to do is switch the BRaptor keypad circuit boards out and install the ones from your Wildtrak steering wheel. All your current Wildtrak steering...

As in the Warn Zeon 10s platinum

Yep, not like my other vehicle that won’t let you lock the doors if the fob is inside.

@Ed Morris I’m a little late to this thread, nonetheless I’m finally installing the Lobo HNT on my 2022 Wildtrak. Your comment amount making a wood cradle is exactly what I’m planning to do. I learned that from installing an Atlas II and NP435 4speed in my 68 Bronco. It went smoothly so I’ll be...

@Caprichoso I did the BRaptor steering wheel swap on my 2022 Wildtrak based on @Rfisher75 posts. It was a pretty simple swap with no loose or extra wires and no programming. What you need to do is switch your Hertige steering wheel circuit boards for the BRaptor circuit boards and then plug in...