ARIZONA Bronco Club

You guys know of a good local joint (phx/chandler/tempe area) that has a slew of NPT and/or JIC fittings and PTFE braided air lines and all that? Trying to build out a different setup for the ARB compressor and quick connect but is a pain to do it blindly on amazon or {insert arb parts reseller 4x4 sites here} sites.

Like Lopers or ?? idk. thoughts?

Not in the area specified, but you may find that sort of thing up in Globe. Its more of an industrial town due to all the mining going on.

I would think any offroading shop could help you with that ....
have you tried these guys?
https://www.4wheelparts.com/stores/arizona/4wp-gilbert-az-59

@buzpro

@buzpro I haven't but i'm aware of them... I don't think they have a lot "in stock"... more like they order and get stuff sent from their DC (distribution center) in a day or two. I could be wrong; i've never actually gone INTO one.

You would be amazed at what some of the larger Ace Hardware Stores have on hand

@sklnbnzaz

@sklnbnzaz that's something I dislike about Ace... 1. their website is NEVER accurate as to stock at ANY store... 2. every store is almost entirely different... I have two nearby me and they're like two different stores lol.

@RynoRanger

@RynoRanger I get it on that, they're all completely independent of each other (unless same owner) but I tell you, when I am looking for something that is out of the norm (especially fasteners and fittings) I will do way better there than at HD or Lowes.

Here is a pic of what I did awhile back. What the pic doesn't show is that I also added a light under the hood when the switch is on. Used for airing up or down. DM if you have questions, would be happy help (if I can).

@az_dirt

@az_dirt if you got the components locally then yeah i'd have questions... like where... specifically. Otherwise I have a 2-tire Morrflate setup w/ the ARB compressor but... looking to piece-meal a remote chuck line.
I did get some parts (ups literally dropped them off yesterday) from 4x4truckLEDs shop... some arb braided line and a bracket and some angle parts. I was just looking for a local shop that had all the little parts and hoses to grab and 'build' locally instead of just pictures online.

@RynoRanger

@RynoRanger I bought stuff online and when all arrived I spent time out in the garage putting it together. I don't know of a local shop that would carry all these bits an pieces. I have extra parts but not what you are showing below. Good luck!

like perfect example. I want one of these... does anybody local carry stuff like this? https://www.toolots.com/precise-1-4...-way.html/ng-frontend/#/productDetail?id=6568

Might check with Todd at Doetsch Offroad

ARIZONA Bronco Club

RynoRanger

ARIZONA Bronco Club

Share this group

Quick Overview