Show us your installed wheel / tire upgrades here! (Pics)

[10K_Vet]

Dear DT,

Have you installed Black Rhino Abram in spare location on Bronco and did it hide/obscure the camera view?

I installed cap for the spare but cut out the center for the camera. Just take out the Black Rhino sticker off and that's where you cut it out.

Sponsored

 

[dbattle]

I saw that these are 315/70r17. What’s the offset on the wheels? Also, any lift?

 

[juniorobx]

I saw that these are 315/70r17. What’s the offset on the wheels? Also, any lift?

22 OBX non sas. no lift. (yet lol ) just removed crash bars. 0 offset on wheels.

 

[Discount Tire]

Dear DT,

Have you installed Black Rhino Abram in spare location on Bronco and did it hide/obscure the camera view?

Personally, no however running the spare with the cap off may be the solution, or as 10K Vet noted, modify the cap so the rear camera pokes through.

 

[Inlinejohn]

Personally, no however running the spare with the cap off may be the solution, or as 10K Vet noted, modify the cap so the rear camera pokes through.

The guy I talked to who has these wheels claims that with the offset of -18 compared to factory +30 (delta of 1.9”), the camera gets hidden or very obscured. Adding @10K_Vet to get his feedback as well

Anyone seen the camera stub made longer?

 

[Johnny Rebel]

Black Rhino Primm with 0 offset. Center cap removed and custom 37” tire cover. Camera is slightly obscured but hasn’t caused any issues with usability.

 

[choppersean]

....... custom 37” tire cover. .........

Could you post a link to where you got the tire cover? Totally surprised it is hard to find even a standard Sasquatch sized tire cover and I also need the camera cut-out.

 

[Johnny Rebel]

Could you post a link to where you got the tire cover? Totally surprised it is hard to find even a standard Sasquatch sized tire cover and I also need the camera cut-out.

Here you go. This was a recommendation from another thread on B6G. Very happy with it and would recommend them to anyone looking for a custom cover. Will be buying another one in the next few days for the new Raptor with factory 37's.

https://www.etsy.com/shop/TimsLoft

 

[alohashaneo]

Great to finally see some RRW’s on here. Have my RRW rh-6’s sitting in my garage. Matt black. Just waiting on the bronco to come.

 

[Inlinejohn]

Black Rhino Primm with 0 offset. Center cap removed and custom 37” tire cover. Camera is slightly obscured but hasn’t caused any issues with usability.

I guess one option is to use SAS wheel on spare and cover with this cool cover you have. Then when I do a tire rotation, I just swap wheels, keeping the OE wheel on the spare at all times.
@Discount Tire @10K_Vet

 

[Johnny Rebel]

I guess one option is to use SAS wheel on spare and cover with this cool cover you have. Then when I do a tire rotation, I just swap wheels, keeping the OE wheel on the spare at all times.
@Discount Tire @10K_Vet

Definitely an option. Since I went from the stock BB wheel/tire setup to 37’s, I went ahead and bought 5 new wheels/tires and follow the 5-tire rotation method. On the spare, I removed the center cap and threw it in the rear storage compartment below the floor and have it if I need it.

For me, this is A LOT easier than swapping the tire to a different wheel every time I rotate them. I’m a high-mileage driver and also wanted a full-size spare though, so your needs may be different.

Good luck with whatever you decide!

 

[Inlinejohn]

Definitely an option. Since I went from the stock BB wheel/tire setup to 37’s, I went ahead and bought 5 new wheels/tires and follow the 5-tire rotation method. On the spare, I removed the center cap and threw it in the rear storage compartment below the floor and have it if I need it.

For me, this is A LOT easier than swapping the tire to a different wheel every time I rotate them. I’m a high-mileage driver and also wanted a full-size spare though, so your needs may be different.

Good luck with whatever you decide!

Sounds like a great plan for you for sure. I’ve never been a high mileage person but of course that could change. The swapping wheels if definitely a hassle, but my wheels have a 18mm more offset than yours, so will be even “worse” for camera views.

 

[Bronco4Me/Miami]

chrome wheels with the green looks amazing! well done

Thank you.

 

[internationlriders]

So many great looking wheel tire combos on here! I used to have the KMC 718s in 17x8.5 0mm offset, now I have my first choice of wheels on that took some time to arrive - Black Rhino Rumbles in 17x8.5 0mm offset wrapped in 37x12.5 Mickey Thompson Baja Boss A/Ts with RPG perch collars. The two issues I had were getting my homemade mudflaps to not inferfere but that was a pretty simple fix, and very slight rub on the fenders at full flex but not enough to cause me any concern, no marks left on tires or anywhere.

718s

I really like the super simple look of the Rumbles

And a towing pic for fun, bit of sag but after adjusting the leveling bars on the distribution hitch it sat perfectly. Did 5k miles on this trip.

 

[10K_Vet]

Personally, no however running the spare with the cap off may be the solution, or as 10K Vet noted, modify the cap so the rear camera pokes through.

It's only 3 screws to take off cap, the other ones are fake.

Sponsored