Bingo on the response above, Zroadz kit with Rigid pods.What are you using for mount/lights on your bumper?
Sponsored
Bingo on the response above, Zroadz kit with Rigid pods.What are you using for mount/lights on your bumper?
8.5Whats the width of the rims you went with?
How long have you had the Icon Stage 4 on there and how does it ride? I was looking into that kit for mine later on. Any install issues?2” Icon stage 4 coilovers
35/12.50/17 Mickey Thompson Baja Boss A/T
KMC 545 TREK Wheels in bronze
Don’t like the orange, it’s coming off here tomorrow
I'm stunned that a modern tire shop still uses hammer on weights?RC 2” lift with 315/70/r17 KO2s on my Black Diamond stock Steelies. Love the look, but experiencing some rubbing at full lock. Anyone have any suggestions for this? What’s the minimum spacer I’d need?
You're going to want to remove the crash bars. Ford does NOT install the crash bars on any Sasquatch equipped models.RC 2” lift with 315/70/r17 KO2s on my Black Diamond stock Steelies. Love the look, but experiencing some rubbing at full lock. Anyone have any suggestions for this? What’s the minimum spacer I’d need?
The Crash Bars are removed.You're going to want to remove the crash bars. Ford does NOT install the crash bars on any Sasquatch equipped models.
The weights are on every Black Diamond with Steelies- not sure if it is functional or not, may just be aesthetic for the steelie wheel to make it look more classic.I'm stunned that a modern tire shop still uses hammer on weights?
how was the install of the avs hood protector? do you have the one that signals as well...or just regular static lights?Stayed with the stock rims. I like them better than what on the market right now. Bumped up to some 35” buckshot 2’s and 1.5” spacers. Wheels be complete now.
What model wheels are those? Thanks!17x8.5, +1 offset with 35 Recons, 2" Zone
265 to 315 means that the inside of your tire has moved 1.0" inward (towards the UCA). The outside has likewise moved 1.0" outward.RC 2” lift with 315/70/r17 KO2s on my Black Diamond stock Steelies. Love the look, but experiencing some rubbing at full lock. Anyone have any suggestions for this? What’s the minimum spacer I’d need?
They look sharp to me also.What model wheels are those? Thanks!
Was pretty straight forward. Tape it on the hood for spacing. Run tape behind it for lining it up. Spaces out 1/4” on each side. I brought it down a little to fill the gap between the grill and hood. Wipe with alcohol, then use the prep pad. Tape the wires on the back side to line up with the water channels they left. I started on the right and just worked it to the left. I cut the ground shorter and put that on the fire wall. Ran the hot to my running lights on a uplifter. Just tapped one wire, they come with some nice wire splicers.how
how was the install of the avs hood protector? do you have the one that signals as well...or just regular static lights?