No, it’s bent.
Aww bummer! I’m not for sure if you know this, but would I need any special equipment in order to replace the brackets? Or is something that could be done in a regular garage. I was going to see if my friend would change out the bumper for me.
Just to clarify, you are looking for mounting brackets.
I read on another post I will need to either a) get new mounting brackets for the inter cooler. Or b)cut off the tow hooks attached to the current standard brackets. I just didn’t know if swapping the brackets was something a somewhat mechanical inclined person could do or if it takes special equipment to hold the inter cooler while swapping brackets. I am not mechanical inclined. Lol
The intercooler does not move or drop down when you remove the brackets, so replacing is a piece of cake. I know this because I removed mine to install the RC brackets.
I reread your post yesterday and became confused on exactly what you need so I stayed away from the conversation
Here is what I have learned from him. He said he used the same mounting brackets for both bumpers however, you have to cut off the tow loops from the brackets when you remove the “capable” so you can install the bash plates. He does not have the attachment points (tow points) for the ”modular” bumper that go on the front, if that is one thing you were asking about. Hope this helps.
