Official Big Bend Club

[KANE COUNTY ILLINOIS]

Re-did the holes, used riv nuts. It was super easy. If you need a picture, let me know

What size riv-nuts and associated screws/bolts did you use? So you used the existing holes in the mounting brackets, too?

Sponsored

 

[Hornet]

A51 BB in Ann Arbor. Pinch weld painted black.

 

[Skip]

Here you go.

 

[Skip]

What size riv-nuts and associated screws/bolts did you use? So you used the existing holes in the mounting brackets, too?

M6, used same bolts and same hole in brackets. Redrilled the holes approx 2” forward on the step. Easiest thing to do is install mud flaps, sat step on on the bracket where the rails don’t hit the mud flaps and mark the holes in the brackets and drill.

 

[KANE COUNTY ILLINOIS]

M6, used same bolts and same hole in brackets. Redrilled the holes approx 2” forward on the step. Easiest thing to do is install mud flaps, sat step on on the bracket where the rails don’t hit the mud flaps and mark the holes in the brackets and drill.

Perfect!! Thank you!!

 

[Skip]

You are welcome.

 

[sniffHound]

Big Bens peeps, we removed tow, MIC, roof rails and side steps to speed things up. Aooo we need a hard top and I just found out Advanced Fiber Concepts is releasing the concept, pricing and preorder info for hard tops tomorrow. Wanted to share.

 

[KANE COUNTY ILLINOIS]

You are welcome.

One more question! Did you swap side steps...passenger to driver side and driver side to passenger side?

 

[Skip]

One more question! Did you swap side steps...passenger to driver side and driver side to passenger side?

No, they remain on the same side.

 

[1Five1 Garage]

Just a couple mods so far.

 

[KANE COUNTY ILLINOIS]

No, they remain on the same side.

Thanks!!

 

[bFWEAD]

A few mod to my A51 Big Bend. Sorry about the dirty pics, tons of salt on the roads still.

l

@Skip, would you mind sharing part # and ordering information for the mat you have inside your cargo enclosure?

 

[www86aws]

I need some help, I'm trying to build 2.3 Man BB with rear lockers. It show that I can add rear lockers for $500 and keep the ratio 4.46 or choose the more expensive $795 rear locker with 4.27 ratio!
I don't get the difference between #1 and #2 and why they both exist.

 

[Skip]

@Skip, would you mind sharing part # and ordering information for the mat you have inside your cargo enclosure?

It is the husky. I had to trim it down when I put in the security enclosure. It is the weatherbeater version panda motorworks. Use Bronco6g code at checkout - https://www.pandamotorworks.com/pro...eater-cargo-liner?_pos=1&_sid=b8a153058&_ss=r

 

[Lexo52]

A few mod to my A51 Big Bend. Sorry about the dirty pics, tons of salt on the roads still.

How's the aux switches? Did you run a fusebox for it as well?

Sponsored