Show us your installed wheel / tire upgrades here! (Pics)

[AzGoat]

That flag artwork on the wall is incorrect. Stars are always on the left. How do people not know this?

Stars are not ALWAYS on the left. At least horizontally.
https://airandspace.si.edu/stories/editorial/heres-why-us-flag-sometimes-appears-backwards

Sponsored

 

[Toccoa]

Stars are not ALWAYS on the left. At least horizontally.
https://airandspace.si.edu/stories/editorial/heres-why-us-flag-sometimes-appears-backwards

I was keeping it simple, but yes, there is the stars always facing the front rule you see on sleeves and vehicles. I’m sure there are a few more exceptions as well. Hanging it vertically, when it can only be seen from one side is the one people seem to mess up the most.

 

[emotoring]

That wheel/tire sizing looks absolutely perfect to me. Sasquatch or non? Any offset? And did you have to lift it?

Thanks. Our Bronco is a Wildtrak with the sasquatch package. We did not install a lift kit and the wheels have a +1mm offset. Here are a few more photos.

 

[AzGoat]

I was keeping it simple, but yes, there is the stars always facing the front rule you see on sleeves and vehicles. I’m sure there are a few more exceptions as well. Hanging it vertically, when it can only be seen from one side is the one people seem to mess up the most.

All good - no disrespect meant. There is a bit of sensitivity around this subject for me as well.

 

[OkieB6G]

Thanks. Our Bronco is a Wildtrak with the sasquatch package. We did not install a lift kit and the wheels have a +1mm offset. Here are a few more photos.

Thanks for the info! I was debating wheel/tire sizes for my Outer Banks, and I think now I'm going to go with something similarly sized.

 

[Broncoder]

KMC Dirty Harry 17×8.5 +18
285/70/17 BFG KO2s

Love these. Debating bronze or gray for my HPR OBX. Also trying to decide between 18s and 17s.

 

[2PT7]

Looking to install these sometime next week when I get my bronco back from repairs. (

(KMC Impact OL)

 

[Erick2123]

anyone checked these out or seem them installed?

 

[BroncoZ13]

Is the tire size below what you have?35x12.50R17LT E 121Q

Yes sir, that’s correct. At first I was a little nervous with the E rated tire, but Bronco rides fantastic with them and I’ve always been a fan of the Ridge Grapplers since I run them on the last few 1/2 ton trucks I’ve owned.

 

[EStepCG2022]

Being transparent here:
After 3K miles on Tina (Oxford White Big Bend Non Squatch 2.7), we finally threw on her some new shoes with heels!

-Zone Offroad 2 inch Leveling (on the fence of waiting for more lift kit options to come to market, or just stick with these and possibly throw on some bilsteins)
-35/12.50/17 BFG KO2 RWL (this gives me the option to throw some old school white lettering for a bit or switch back to normal black sidewalls if needed)
-17x8.5 Fifteen52 Traverse wheels 0 offset (on the fence for all black wheel.. might change it up a bit with some added color to interior of wheel somehow down the road)

Next:
Side step /rock slider
Large Round Lights upfront
Extended Rear spare tire lower rubber support mounts (if anyone knows where I can find these, please share)

How do you like the zone lift? Did you end up sticking with it? Looking at a very similar setup right now

 

[rguest3]

Well, I have Tires and Wheels on order and should be here soon then mounted and Balanced next week.

Method Racing MR705, 18x9 with a +18 Offset.

Toyo AT3s - 37x12.50x18

Now I need a Bronco to mount them on. ETA 1/16/22

I'll post pictures when installed.

 

[Clubdub]

New shoes. Method 701 18” with 18mm off set. 35x12.5x18 K3s

 

[cxcrum]

How do you like the zone lift? Did you end up sticking with it? Looking at a very similar setup right now

I like the zone lift! I have put on 3K miles and no issues.
Taken the bronco to dunes, forest trails, mud, and plenty of highway miles.
Rides great!

 

[Frigger]

Hey. I have a Badlands on order. Been window shopping for wheels. Was thinking of 0 offset. Then adding SAS flares. Do you think the sasquatch flares will line up nicely?

 

[STRATUS]

Badlands Sasquatch with 325/65/18 Nitto Ridge Grabbers -- Thought I'd share what a stock Sasquatch looks like replacing the +33mm offset factory 17" wheels and moving to +10mm offset 18" Enkie Matrix wheel.

Almost the exact same rolling diameter with just .02" taller than stock Sasquatch with the Goodyear 315/70/17 tires now with roughly 3/4" more tire width w/o rubbing .

The actual treads that touch the ground just fit inside of fender where the bulge of the rest of the tire pokes slightly.

Those look great. Are they they gunmetal or black?

Sponsored