swamp2's latest activity

Check out the featured thread on the roof rack "database", there is no difference between a Raptor and non-Raptor roof rack.

Congratulations, I guess.

Mabett makes front cap kits for A-arm bolts in nice clear anodized aluminum. Could you be thinking of this? Ping to @Mabett for a...

Great work @OP. The hardware for the JCR is a mixture of black oxide coated steel and stainless steel. Also a vote for the format and...

Pretty extensive, thanks for putting it together. A couple of notes 1) You can just copy/paste that into a gsheet and it will be...

So don’t say I never did anything for ya:). Here’s a spreadsheet of a large number of the available roof racks available to us as of...

Thanks for the time to investigate and share @raptorusmaximus .

I called ford performance today .... again... got the same story.... again. I was told It came up in the last tech hotline staff meeting...

So conflicted. Worried about pinstripes but won't do PPF. More ground clearance on a Raptor than many jeeps with 40s and claims of...

Bump

I suspect the relatively low shock mounts are due to a combination of travel, packaging and desired handling characteristics. Many of...

Rear Shock Mount Bolt Rehab/Protection: I noticed some rock damage to the bolts (threads) connecting the lower shock mount to the axle...

I noticed some rock damage to the bolts (threads) connecting the lower shock mount to the axle. These bolts just stick out too far...

For minimalist I carry a 2-ton bottle jack (5 lbs) and some scrap blocks 4x4 lumber. The factory scissors jack is lousy

I have some additional measurements (for Raptor). If one only needs to get a single wheel off the ground for changing, strokes are of...

I have been rock crawling for most of my adult life (30+ years but not any sort of professional). Everything from stockish street...

This looks just like the one linked to above that doesn't really cut it. That's not a recommended jack location... Also what about the rear?

Thanks. I should have googled more. This doesn't work for the Raptor - need jacks stands and blocks... If has a mere 5" of stroke. The...

I've only had to jack up my prior rig (4Runner) twice off roading. The factory jack, up on a flat support rock, was arduous but...

Oh goody, another Braptors cost too much thread. :poop:

It’s not over priced when you drive it across country, wheel it in Moab for a week and then drive it back with zero issues handling like...

Come on guys, know your own product and get the details correct! These are made of steel not iron and these two are not synonyms...

Of course it's possible.

I'm reasonably sure the throttle, steering and trans columns in the second table are guesses not data from Ford.

They do look nice but prefer factory due to trail rash.

Anything along these lines is doable. Check out this post...

Minor update here as well. Mine stopped working for a day, but came back after sitting overnight before I got motivated to disconnect...

I upgraded my brake lines (posted that here) but stuck with factory routing. Was more fabrication than I was up for to reroute.

Did you replace and log?

Wow, 50°. That's huge. Which intake sensor? Are you sure that's "apples to apples"?

Any updates here @Spooled ? TIA.

Bummer and yet interesting. My Raptor leaked from the exact same spot except on the passenger side but only after being exposed to a few...

And completely tastefully ;-) Congrats Ducati!

First of all, shout out to Adam @ZFGracing for allowing me to join the beta program at the last minute and also for all the hard work...

Bump. Reasonable offers. These ard functional and pricey new from Ford.

If by "common" you mean 3 total threads, somewhat hard to find (depending on exact diction used in search) and lots of reading every...

I actually thought I was showing some restraint in the light setup. All BD yes (except for some KC Cyclone rock lights). No light bars...

I think you're referring to 22B27, which was a program for the front driveshaft, but only for 21MY. That was for one of the CV boots not...

Don't have pics from way back but at one point they were coating the splines with some kind of coating to help with the sticking but...

Holy crap @ironmike that looks like an absolute crap ton of lumens there on your rig. Are they all BD? What is your use case - you must...

WARTHOG along with BRAPTOR we’re both unavailable in NY so, I got the next best available option…

my Raptor has been doing this for like 15k+ miles. It's annoying for sure.

I have the same exact issue when starting after being stopped at a light. Haven’t taken it in yet but it definitely worries me.

I have that in my 2 door. It’s annoying, almost seems like something is loose in the rear suspension or a U joint is toast. Best way I...

?? Do you mean there was a recall? A production line recall? Is this information specifically a reply to my comment you quoted about...

Sounds like relubing is a bandaid, no?

It was more of an educated guess based on experience. F150 dealt with a very similar concern for years and there was a TSB at one point...

Always have been - one side back the other white.

Finally. Excited for this release.

Ahhh Viton, the wonder elastomer; tough, resistant to about every chemical under the sun, great wear resistance and good at very high...